Sca（Shared Call Appearance - Alcatel-Lucent H2 DeskPhone User Manual

H2 DeskPhone
H2P DeskPhone
Parameters
Normal Call Priority
Enable Page Priority
Name
Host:port
⚫ Press the DSSKY of Multicast Key which you set.
⚫ The receiving end will receive the multicast call and play the multicast automatically.
9.7 SCA（Shared Call Appearance）
Users need the support of the server end to use the SCA function. Here is an example of a BroadSoft server.
Configuring on the telephone.
1)
⚫ When registering with the BroadSoft server, a telephone can register the account created previously on
multiple terminals.
⚫ After the telephone set registers with the BroadSoft server, a server type needs to be set. Specifically,
log in to the web page of the telephone set, choose [Line] >> [SIP] >> [Advanced Settings] and set
Specific Server Type to BroadSoft, as shown in the following figure.
8AL90394ENAAed01
Table 11 - MCAST Parameters on the Web
Description
Define the priority of the active call: 1 is the highest priority, 10 is the lowest.
The voice call in progress shall take precedence over all incoming paging calls.
Server name of the multicast to be listened to.
Server's multicast IP address and port for the multicast to be listened to.
Figure 68 – Registering a BroadSoft account
53 /111