Alcatel-Lucent H2 DeskPhone User Manual page 82

H2 DeskPhone
H2P DeskPhone
Hotline Delay
Hotline Number
Dial Without Registered
Enable Missed Call Log
DTMF Type
DTMF SIP INFO Mode
Enable DND
Subscribe For Voice
Message
Use VPN
Use STUN
Enable Failback
Failback Interval
Signal Failback
Signal Retry Counts
Codecs Settings
Video Codecs
Advanced Settings
Use Feature Code
Enable DND
Disable DND
Enable Call Forward
Unconditional
Disable Call Forward
Unconditional
Enable Call Forward on
Busy
8AL90394ENAAed01
immediately if audio channel is opened by off-hook handset or hands-free
speaker or headphone is turned on.
Sets the delay for hotline before the system automatically dials it.
Sets the hotline dialing number.
Sets call out by proxy without registration.
If enabled, the phone will save missed calls in the call history record.
Sets the DTMF type to be used for the line.
Sets the SIP INFO mode to send '*' and '#' or '10' and '11'.
Enables Do-not-disturb. Any incoming call to this line will be rejected
automatically.
Enables the device to subscribe to a voice message waiting notification. If
enabled, the device will receive notification from the server if there is a voice
message waiting on the server.
Sets the line to use VPN restricted route.
Sets the line to use STUN for NAT traversal.
Whether or not to switch to the primary server when it is available.
A Register message is used to periodically detect the time interval for the
availability of the main Proxy.
Multiple proxy cases, whether to allow the invite/register request to also
execute failback.
The number of attempts that the SIP Request considers proxy unavailable
under multiple proxy scenarios.
Sets the priority and availability of the codecs by adding or remove them from
the list.
Selects video code to preview video.
When this setting is enabled, the features in this section will not be handled
by the device itself but by the server instead. In order to control the enabling
of the features, the device will send feature code to the server by dialing the
number specified in each feature code field.
Set the feature code to dial to the server.
Set the feature code to dial to the server.
Set the feature code to dial to the server.
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
82 /111