Alcatel-Lucent H2 DeskPhone User Manual page 104

H2 DeskPhone
H2P DeskPhone
12.24 Security >> Web Filter
The user can set up a configuration management telephone that allows only machines with a certain
network segment IP access.
IP segments can be added and removed. Configure the starting IP address within the start IP, end the IP
address within the end IP, and click [Add] to submit to take effect. A large network segment can be set, or it
can be divided into several network segments to be added. If the user wants to delete, select the initial IP of
the network segment to be deleted from the drop-down menu, and then click [Delete] to apply.
To enable web page filtering, configure enable/disable web page access filtering. Click the "apply" button for
this to take effect.
Note: If the device you are accessing is in the same network segment as the telephone, please do not
configure the filter segment of the web page to be outside your own network segment; otherwise, you will
not be able to log in to the web page.
8AL90394ENAAed01
Figure 125 - Web filter settings
Figure 126 - Web Filter Table
104 /111