Ringing Mute; Hold/Resume Call; Dnd - Alcatel-Lucent H2 DeskPhone User Manual

H2 DeskPhone
H2P DeskPhone

Ringing Mute

8.7.2
⚫ Mute: Press the Mute button when the telephone is in Standby mode:
The top right corner of the telephone screen shows the Bell Mute icon
button is always on. When there is an incoming call, the telephone will display the incoming call
interface but will not ring.
⚫ Cancel ring tone mute: On the Standby or Incoming Call screen, press the Mute button
volume up
after cancelling

8.8 Hold/resume call

The user can press the [Hold] button to maintain the current call, and this button will become the [Resume]
button. The user can press the "resume" button to restore the call. Sometimes you need to press the [More]
button to find the [Hold] or [Resume] button.

8.9 DND

The user may enable the Do-Not-Disturb (DND) feature on the device to reject incoming calls (including call
waiting). The DND can be enabled on a line basis.
To enable/disable all lines DND on the telephone, use one of the following methods:
⚫ Telephone interface: default Standby mode，
Press the [DND] button to enter the DND setting interface, select the line or telephone to enable
1)
DND.
Press the [DND] button to enter the DND setting interface and disable DND.
2)
If the user wants to enable/disable uninterrupted function on a specific line, the user can set the
uninterrupted function on the line configuration page.
Press the [Setting] >> [Phone] >> [DND] button, Enter [DND] to edit the interface.
1)
8AL90394ENAAed01
Figure 26 - Ringing mute
to cancel ring tone mute. The Mute icon is no longer shown in the upper right corner
. The telephone mute icon is off.
Figure 27 - Call hold interface
Figure 28 - Enable DND
. The red light for the Mute
again or
34 /111