H2 DeskPhone
H2P DeskPhone
8.16 Anonymous call
Anonymous call
8.16.1
The telephone can set up anonymous calls to hide the calling number and the calling name.
⚫
The web page [Line] >> [SIP] >> [Advanced Settings] can also be used to open the Anonymous Call
mode.
⚫
A setting to enable anonymous calls also corresponds to the SIP line. That is, a setting on the SIP1
page can only take effect on the SIP1 line.
The following is a transcript of an anonymous call received by the telephone.
Banning anonymous calls
8.16.2
The device can be set to prohibit anonymous calls, that is, anonymous calls to the number will be directly
rejected.
⚫
In the telephone, go to [Setting] >> [Phone] >> [Anonymous], click to enter, and all SIP lines will be
displayed.
⚫
Click Softkey [Switch] or [<] [>] to switch the SIP line and enable anonymous calls.
⚫
On the web page, go to [Line] >> [SIP] >> [Advanced Settings], where you can also disable
anonymous calls.
⚫
The setup to disable anonymous calls also corresponds to the SIP line. That is, settings on the SIP1
page can only take effect on the SIP1 line.
8AL90394ENAAed01
Figure 47 – Enabling an anonymous web page call
Figure 48 - Anonymous call log
Figure 49 - Anonymous calls are not allowed on the telephone
→
43 /111