Alcatel-Lucent H2 DeskPhone User Manual page 83

H2 DeskPhone
H2P DeskPhone
Disable Call Forward on
Busy
Enable Call Forward on
No Answer
Disable Call Forward on
No Answer
Enable Blocking
Anonymous Call
Disable Blocking
Anonymous Call
Call Waiting On Code
Call Waiting Off Code
Send Anonymous On
Code
Send Anonymous Off
Code
SIP Encryption
RTP Encryption
Enable Session Timer
Session Timeout
Enable BLF List
BLF List Number
Response Single Codec
BLF Server
Keep Alive Type
Keep Alive Interval
Keep Authentication
Blocking Anonymous
Call
User Agent
8AL90394ENAAed01
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
Sets the feature code to dial to the server.
Enables SIP encryption so that SIP transmission will be encrypted.
Enables RTP encryption so that RTP transmission will be encrypted.
Sets the line to enable call ending by session timer refreshment. The call
session will be ended if there is not a new session timer event update
received after the timeout period.
Set the session timer timeout period.
Enable/Disable BLF List
BLF List allows one BLF key to monitor the status of a group. Multiple BLF
lists are supported.
If setting enabled, the device will use single codec in response to an
incoming call request.
The registered server will receive the subscription package from the ordinary
application of a BLF telephone.
Please enter the BLF server if the sever does not support a subscription
package. The registered server and subscription server will be separated.
Sets the line to use dummy UDP or SIP OPTION packet to keep NAT pinhole
opened.
Sets the "keep alive" packet transmitting interval
Keeps the authentication parameters from previous authentication.
Rejects any incoming call that does not present a caller ID.
Sets the user agent. The default is Model with Software Version.
83 /111