H2 DeskPhone
H2P DeskPhone
ACS Server Type
ACS Server URL
ACS User
ACS Password
Enable TR069 Warning
Tone
TLS Version
INFORM Sending Period
STUN Server Address
STUN Enable
Firmware upgrade
10.6.5
⚫
Web page: Log in to the telephone web page, go to [Status] >> [Upgrade].
Parameter
Upgrade server
Enable Auto Upgrade
Upgrade Server Address1
Upgrade Server Address2
Update Interval
Firmware Information
Current Software Version
8AL90394ENAAed01
There are 2 server type options, common and CTC.
ACS server address
ACS server username (up to 59 characters)
ACS server password (up to 59 characters)
If TR069 is enabled, there will be a prompt tone when connecting.
TLS version (TLS 1.0, TLS 1.1, TLS 1.2)
INFORM signal interval time, which ranges from 1 second to 999 seconds.
Configure STUN server address
To enable STUN server for TR069
Figure 110 - Web page firmware upgrade
Table 16 - Firmware Upgrade
Description
Enables automatic upgrade. If there is a new version txt and new
software or firmware on the server, the telephone will show a
prompt upgrade message after the update interval.
Set available upgrade server address.
Set available upgrade server address.
Set update interval.
This will show the current software version.
74 /111