Telephone Settings >> Media Settings - Alcatel-Lucent H2 DeskPhone User Manual

H2 DeskPhone
H2P DeskPhone
12.8 Telephone settings >> Media settings
Change voice settings.
Parameters
Codecs Settings
Audio Settings
Handset Volume
Default Ring Type
Speakerphone Volume
Headset Ring Volume
Headset Volume
Speakerphone Ring Volume
G.723.1 Bit Rate
DTMF Payload Type
AMR Payload Type
Headset Mic Gain
Opus payload type
OPUS Sample Rate
ILBC Payload Type
ILBC Payload Length
Enable MWI Tone
Enable VAD
Onhook Time
EHS Type
RTP Control Protocol(RTCP) Settings
CNAME user
CNAME host
RTP Settings
RTP keep alive
Alert Info Ring Settings
8AL90394ENAAed01
Table 23 - Voice Settings
Description
Select enable or disable voice encoding:
G.711A/U, G.722, G.729, G.726-16, G726-24, G726-32, G.726-40,
ILBC, Opus
Set the handset volume. The value must be 1~9
Configures default ring tones. If no special ring tone is set for the
telephone number, the default ring tone will be used.
Sets the hands-free volume to 1-9.
Sets the volume of the earphone ring tone to 1~9.
Sets the volume of the headset to 1~9.
Sets the volume of hands-free ring tone to 1~9.
5.3kb/s or 6.3kb/s is available.
Enters the DTMF payload type. The value must be 96~127.
Sets AMR load type, range 96~127.
Sets the earphone's radio volume gain to fit different models of
earphones.
Sets Opus load type, range 96~127.
Sets Opus sampling rate, including opus-nb (8KHz) and opus-wb
(16KHz).
Sets the ILBC payload type. The value must be 96~127.
Sets the ILBC payload length
When there is a new voice message, the telephone will start a special
dial tone.
Determines whether voice activity detection is enabled.
Configures a minimum response time. Default is 200ms.
EHS headset is available after enabling.
Sets CNAME user
Sets CNAME host
Holds the call and sends the packet after 30 seconds.
94 /111