Alcatel-Lucent H2 DeskPhone User Manual page 84

H2 DeskPhone
H2P DeskPhone
Specific Server Type
SIP Version
Anonymous Call
Standard
Local Port
Ring Type
Enable user=phone
Use Tel Call
Auto TCP
Enable Rport
Enable PRACK
DNS Mode
Enable Long Contact
Enable Strict Proxy
Convert URI
Use Quote in Display
Name
Enable GRUU
Sync Clock Time
Enable Inactive Hold
Caller ID Header
Use 182 Response for
Call waiting
Enable Feature Sync
Enable SCA
CallPark Number
Server Expire
TLS Version
uaCSTA Number
Enable Click To Talk
Flash mode
Flash Info Content-Type
Flash Info Content-Body
PickUp Number
8AL90394ENAAed01
Sets the line to collaborate with specific server type.
Sets the SIP version.
Sets the standard to be used for anonymous.
Sets the local port.
Sets the ring tone type for the line.
Sets user=phone in SIP messages.
Sets use tel call.
Uses TCP protocol to guarantee usability of transport for SIP messages
above 1500 bytes.
Sets the line to add rport in SIP headers.
Sets the line to support PRACK SIP message.
Selects DNS mode, A, SRV, NAPTR.
Allows more parameters in contact field per RFC 3840.
Enables the use of strict routing. When the telephone receives packets from
the server，it will use the source IP address, not the address in via field.
Converts non-digits and alphabet characters to %hh hex code
Whether to add quote in display name.
Supports Globally Routable User-Agent URI (GRUU).
Time Sync with server.
With the post-call hold capture package enabled, you can see that in the
INVITE package, SDP is inactive.
Sets the caller ID header.
Sets the device to use 182 response code at call waiting response.
Feature Sync with server.
Enables/disables SCA (Shared Call Appearance)
Sets the CallPark number.
Sets the timeout to use the server.
Chooses TLS Version.
Sets uaCSTA number.
With the use of a special server, click to call out directly after enabling.
Chose flash mode, normal or SIP info.
Sets the SIP info content type.
Sets the SIP info content body.
Sets the scramble number when Pickup is enabled.
84 /111