H2 DeskPhone
H2P DeskPhone
8 Basic Function
8.1 Making telephone calls
◼
Default line
The device provides two line services. If both lines are configured, the user can make or receive telephone
calls on either line. If one or two lines are configured, the default line name is displayed in the top left corner.
To enable or disable the default line, the user can configure it in the web interface (Telephone settings /
Features / Basic Settings).
◼
Dialing methods
The user can dial a number by
⚫
Entering the number directly
⚫
Selecting a telephone number from phonebook contacts (Refer to
⚫
Selecting a telephone number from cloud phonebook contacts (Refer to
⚫
Selecting a telephone number from call logs (Refer to
⚫
Redialing the last dialed number
Dial number, then open audio channel
◼
To make a telephone call, the user first dials a number by one of the above methods. When the dialed
number is completed, the user can press the [Dial] button on the soft-menu, or press the hand-free button to
turn on the speaker, or press the
the current line, or press the line key to call out with a specified line.
8AL90394ENAAed01
Figure 12 - Default line
soft key to turn on the headphone, or lift the handset to call out with
Figure 13 - Enable voice channel dialing
10.2.1 Local
10.2.3 Cloud
10.3 Call
log)
contacts)
phonebook)
28 /111