Programming Chair Programs - Dentsply Sirona Intego Brief Operating Instructions

Programming chair programs

S
0
1 2
S 0
1 2
12
Dentsply Sirona
The four factory preset chair programs:
• Mouth rinsing position S
• Entry/exit position 0
• 1 and 2
can be individually programmed for both
user profiles (A and B) on the EasyPad and
each of the four user profiles (A to D) on
the EasyTouch.
 On the EasyTouch, the
ment dialog
screen.
1. Move the patient chair to the desired
treatment position.
2. Switch the operating light on or off (this
is set during programming).
3. Press and hold the desired program key
(S, 0, 1 or 2) (> 2s).
 An acoustic signal sounds. Your settings
are now stored under the desired
program key.
Note: Chair programs S and 0 can also be
programmed on the assistant element side.
Start
is displayed on the touch-
or Instru-