L2Tp Connection - peplink Pepwave MAX Series User Manual

10.1.4 L2TP Connection

L2TP has all the compatibility and convenience of PPTP with greater security. Combine this with IPsec
for a good balance between ease of use and security.
L2TP User Name /
Password
Confirm L2TP Password
Server IP Address / Host
Address Type
DNS Servers
http://www.peplink.com
L2TP Settings
Enter the required information in these fields in order to connect via L2TP to your ISP.
The parameter values are determined by and can be obtained from your ISP.
Verify your password by entering it again in this field.
L2TP server address is a parameter which is provided by your ISP.
Note: Leave this field blank unless it is provided by your ISP.
Your ISP will also indicate whether the server IP address is Dynamic or Static. Please click the
appropriate value.
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the
DNS (Domain Name System) servers to be used when a DNS lookup is routed through this
connection.
Selecting Obtain DNS server address automatically results in the DNS servers assigned
by the PPPoE server to be used for outbound DNS lookups over the WAN connection.
(The DNS servers are obtained along with the WAN IP address assigned from the PPPoE
server.)
When Use the following DNS server address(es) is selected, you can enter custom DNS server
addresses for this WAN connection into the DNS server 1 and DNS server 2 fields.
66 Copyright @ 2017 Pepwave