Event Log; Snmp - peplink Pepwave MAX Series User Manual

25.6 Event Log

Event log functionality enables event logging at a specified remote syslog server. The settings for
configuring the remote system log can be found at System>Event Log.
Remote Syslog
This setting specifies whether or not to log events at the specified remote syslog server.
Remote Syslog
This setting specifies the IP address or hostname of the remote syslog server.
Host
The Pepwave router can also send push notifications to mobile devices that have our Mobile Router
Push Events
Utility installed. Check the box to activate this feature.
For more information on the Router Utility, go to:
"http://www.peplink.com/products/router-utility"
www.peplink.com/products/router-utility

25.7 SNMP

SNMP or simple network management protocol is an open standard that can be used to collect
information about the Pepwave router. SNMP configuration is located at System>SNMP.
http://www.peplink.com
Event Log Settings
HYPERLINK
173 Copyright @ 2017 Pepwave