Algorithm: Priority; Algorithm: Overflow - peplink Pepwave MAX Series User Manual

Matching traffic will be routed through the specified WAN connection, regardless of the health check
status of the WAN connection. Starting from Firmware 5.2, outbound traffic can be enforced to go
through a specified SpeedFusion

15.2.4 Algorithm: Priority

This setting specifies the priority of the WAN connections used to route the specified network service.
The highest priority WAN connection available will always be used for routing the specified type of
traffic. A lower priority WAN connection will be used only when all higher priority connections have
become unavailable.
Starting from Firmware 5.2, outbound traffic can be prioritized to go through SpeedFusion
connection(s). By default, VPN connections are not included in the priority list.
Configure multiple distribution rules to accommodate different kinds of services.

15.2.5 Algorithm: Overflow

The traffic matching this rule will be routed through the healthy WAN connection that has the highest
priority and is not in full load. When this connection gets saturated, new sessions will be routed to the
next healthy WAN connection that is not in full load.
http://www.peplink.com
TM
connection.
Tip
111
TM
Copyright @ 2017 Pepwave