Ethernet Wan - peplink Pepwave MAX Series User Manual

10.1 Ethernet WAN

This field specifies the Health Check method to be used for this WAN connection.
● Disabled - The WAN connection is always considered to be up and will not be treated as
● PING - ICMP PING packets will be issued to test connectivity with configurable target IP
Health Check
● DNS Lookup - DNS lookups will be issued to test the connectivity with configurable target
Method
● HTTP - HTTP connections will be issued to test the connectivity with configurable URLs
Default: DNS Lookup
These fields are for specifying the target IP addresses or host names where ICMP Ping packets will be
sent to for health check.
If the box Use first two DNS servers as PING Hosts is checked, the first two DNS servers will be the
PING Hosts
ping targets for checking the connection healthiness. If the box is not checked, the field Host 1 must
be filled and the field Host 2 is optional.
The connection is considered to be up if ping responses are received from any one of the ping hosts.
If a health check test cannot be completed within the specified amount of time, the test will be treated
Timeout
as failed.
Health Check
This is the time interval between each health check test.
Interval
http://www.peplink.com
Health Check Settings
down for any IP routing errors.
addresses or host names.
DNS server IP addresses.
and strings to match.
60 Copyright @ 2017 Pepwave