peplink PEPWAVE MAX Series User Manual
  1. Manuals
  2. Brands
  3. peplink Manuals
  4. Network Router
  5. Pepwave MAX Series
  6. User manual

peplink PEPWAVE MAX Series User Manual

For more information, please visit peplink.com
Hide thumbs Also See for PEPWAVE MAX Series:
Table of Contents

Advertisement

Quick Links

Download this manual
MAX Series
User Manual (Declaration)
Pepwave Products:
MAX 700 / HD2 / HD2 IP67 / HD2 Mini / HD2 MBX 5G / HD2 MBX / HD Dome / HD Dome Pro /
HD4 / HD4 MBX 5G / HD4 MBX / MBX Mini / HD4 IP67 / Transit / Transit Duo / Transit 5G /
Transit Core / Transit Mini / Transit Pro E / Transit Duo Pro / BR1 Classic / BR1 MK2 / BR1 Slim
/ BR1 ENT / BR1 M2M / BR1 Mini (HW2) / BR1 Mini (HW3) / BR1 Mini Core / BR1 Mini Core
(HW3) / BR1 ESN / BR1 Pro LTE / BR1 Pro (CAT-20) / BR1 Pro 5G / BR2 Pro / BR1 IP55 / BR1
IP67 / BR2 IP55 / On-The-Go / HD2 with MediaFast / HD4 with MediaFast / SpeedFusion
Engine / UBR LTE / UBR Plus / PDX
Pepwave Firmware 8.3.1
August 2023
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice.
Copyright © 2021 Peplink Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Peplink International
Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PEPWAVE MAX Series and is the answer not in the manual?

Questions and answers

Related Manuals for peplink PEPWAVE MAX Series

Summary of Contents for peplink PEPWAVE MAX Series

  • Page 1 Specifications are subject to change without notice. Copyright © 2021 Peplink Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Peplink International Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

  • Page 2: Table Of Contents

    2.21 MAX HD4 IP67 2.22 MAX BR1 Classic 2.23 MAX BR1 MK2 2.24 MAX BR1 Slim 2.25 MAX BR1 Mini (HW2) 2.26 MAX BR1 Mini (HW3) 2.27 MAX BR1 Mini Core 2.28 MAX BR1 Mini Core (HW3) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 3 7 System 8 Status 9 Ignition Sensing Please refer to this link for the details of Ignition Sensing. Appendix A: Restoration of Factory Defaults Appendix B: FusionSIM Manual Appendix C: Ports usage overview Appendix D: Declaration https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 4: Introduction And Scope

    This manual covers setting up Pepwave routers and provides an introduction to their features and usage. Tips Want to know more about Pepwave routers? Visit our YouTube Channel for a video introduction! https://youtu.be/13M-JHRAICA https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 5: Glossary

    Quality of Service SNMP Simple Network Management Protocol Transmission Control Protocol User Datagram Protocol Virtual Private Network VRRP Virtual Router Redundancy Protocol Wide Area Network WINS Windows Internet Name Service WLAN Wireless Local Area Network https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 6: Product Features

    4G LTE modem. Below is a list of supported features on Pepwave routers. Features vary by model. For more information, please see peplink.com/products. Supported Network Features 1.1.1 WAN ●...
  • Page 7 ● Persistent routing for specified source and/or destination IP addresses per TCP/UDP service ● Traffic prioritization and DSL optimization ● Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms 1.1.7 AP Controller https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 8 Quality of service for different applications and custom protocols ● User group classification for different service levels ● Bandwidth usage control and monitoring on group- and user-level ● Application prioritization for custom protocols and DSL/cable optimization https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 9: Other Supported Features

    ● UPnP / NAT-PMP ● Real-time, hourly, daily, and monthly bandwidth usage reports and charts ● IPv6 support ● Support USB tethering on Android 2.2+ phones * Not supported on MAX Surf-On-The-Go, and BR1 variants https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 10: Pepwave Max Mobile Router Overview

    (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached. The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 11 Connected to wireless network(s) without traffic LAN and Ethernet WAN Ports Green LED 10 / 100/ 1000 Mbps Blinking Data is transferring Orange LED No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 12: Max Hd2

    MAX HD2 2.2.1 Panel Appearance 2.2.2 LED Indicators https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 13: Max Hd2 Ip67

    10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports MAX HD2 IP67 2.3.1 Panel Appearance https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 14 2.3.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 15: Max Hd2 Mini

    System initializing Booting up or busy Status Blinking red Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular 1 / Blinking slowly Connecting to network(s) Cellular 2 Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 16: Max Hd Dome

    POE Disabled Blinking 10 / 100 / 1000 Mbps and Data is transferring Orange LED No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports MAX HD Dome 2.5.1 Panel Appearance https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 17 Copyright @ 2021 Peplink...

  • Page 18: Max Hd Dome Pro

    MAX HD Dome Pro 2.6.1 Panel Appearance https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 19 Copyright @ 2021 Peplink...

  • Page 20: Max Transit / Max Transit Duo (Cat-12)

    MAX Transit / MAX Transit Duo (CAT-12) 2.7.1 Panel Appearance 2.7.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 21 LAN and Ethernet WAN Ports 1000 Mbps Green LED 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 22: Max Transit (Cat-18)

    MAX Transit (CAT-18) 2.8.1 Panel Appearance 2.8.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 23 LAN and Ethernet WAN Ports 1000 Mbps Green LED 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 24: Max Transit 5G

    Cellular Indicators Disabled or no SIM card inserted Cellular 1 / Blinking slowly Connecting to network(s) Status Green Connected to network(s) Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi Blinking Wi-Fi AP is turn on https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 25 LAN and Ethernet WAN Ports 1000 Mbps Green LED 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 26: Max Transit Mini

    Connecting to wireless network(s) Wi-Fi Blinking Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 27: Max Transit Pro E

    LAN 1 Port POE Enabled Green LED POE Disabled Blinking 10 / 100 / 1000 Mbps and Data is transferring Orange LED No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 28 Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 29: Max Transit Core

    – 1000 Mbps Right LED OFF – 10 / 100 Mbps or ports are not connected ORANGE – Port is connected without traffic Left LED Blinking – Data is transferring OFF – Port is not connected https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 30 Port Type Auto MDI/MDI-X ports Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting 4G/3G USB modems https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 31: Max Transit Duo Pro

    Cellular Indicators Disabled or no SIM card inserted Cellular 1 / Blinking slowly Connecting to network(s) Cellular 2* Green Connected to network(s) Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi Blinking Wi-Fi AP is turn on https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 32 LAN and Ethernet WAN Ports 1000 Mbps Green LED 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 33: Max Br1 Esn

    Connecting to wireless network(s) Wi-Fi Blinking Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 34: Max Hd2 And Hd4 With Mediafast

    Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4. 2.15.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 35 Ethernet WAN Ports 1000 Mbps Green LED 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 36: Max Hd4

    The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 37 LAN Ports POE Enabled Green LED POE Disabled Blinking 10 / 100 / 1000 Mbps and Data is transferring Orange LED No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 38 Ethernet WAN Ports 1000 Mbps Green LED 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 39: Max Hd4 Mbx (Cat-12)

    The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 2.17.2 LED Indicators https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 40 Port is not connected or slowed than 1000 Mbps Right Green Gigabit speed Port is not connected Left Orange Blinking Data is transferring Port is connected without traffic Ethernet LAN Ports PoE disabled Right Green PoE enabled Port is not connected Left Orange https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 41 Blinking Data is transferring Port is connected without traffic https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 42: Max Hd2/4 Mbx (Cat-20)

    Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 2.18.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 43 Left Orange Blinking Data is transferring Port is connected without traffic Ethernet LAN Ports PoE disabled Right Green PoE enabled Port is not connected Blinking Data is transferring Left Orange Port is connected without traffic https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 44: Max Hd2/4 Mbx (5G)

    The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the section 25.4 https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 45 Port is not connected or slowed than 1000 Mbps Right Green Gigabit speed Port is not connected Left Orange Blinking Data is transferring Port is connected without traffic Ethernet LAN Ports PoE disabled Right Green PoE enabled https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 46 Port is not connected Left Orange Blinking Data is transferring Port is connected without traffic https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 47: Max Mbx Mini

    GREEN – Power on Ethernet WAN Ports Port is not connected or slowed than 1000 Mbps Right Green Gigabit speed Port is not connected Left Orange Blinking Data is transferring Port is connected without traffic https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 48 Disabled or no SIM card inserted Cellular 1 / 2 Blinking slowly Connecting to network(s) Green Connected to network(s) Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting 4G/3G USB modems https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 49: Max Hd4 Ip67

    2.21 MAX HD4 IP67 2.21.1 Panel Appearance 2.21.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 50: Max Br1 Classic

    2.22 MAX BR1 Classic 2.22.1 Panel Appearance 2.22.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 51 Connecting to wireless network(s) Wi-Fi Blinking Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 52: Max Br1 Mk2

    Booting up or busy Status Blinking red Boot up error Green Ready Wi-Fi Indicators Disabled intermittent Blinking slowly Connecting to wireless network(s) Wi-Fi Blinking Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 53 LAN and Ethernet WAN Ports 1000 Mbps Green LED 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 54: Max Br1 Slim

    Connecting to wireless network(s) Wi-Fi Blinking Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 55 LAN and Ethernet WAN Ports 100 Mbps Green LED 10 Mbps Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 56: Max Br1 Mini (Hw2)

    2.25 MAX BR1 Mini (HW2) 2.25.1 Panel Appearance 2.25.2 LED Indicators Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready Cellular Indicators https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 57 Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) Wi-Fi Indicators Disabled intermittent Blinking slowly Connecting to wireless network(s) Wi-Fi Blinking Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 58: Max Br1 Mini (Hw3)

    Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) Wi-Fi Indicators Wi-Fi AP is turn off Wi-Fi Wi-Fi AP is turn on https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 59: Max Br1 Mini Core

    The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 60: Max Br1 Mini Core (Hw3)

    The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 61: Max Br1 M2M

    The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular Blinking slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 62 LAN and Ethernet WAN Ports 100 Mbps Green LED 10 Mbps Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 63: Max Br1 Ent

    Connected to network(s) LAN and Ethernet WAN Ports Green LED 10 / 100 / 1000 Mbps Blinking Data is transferring Orange LED No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 64: Max Br1 Pro

    The statuses indicated by the front panel LEDs are as follows: Status Indicators System initializing Booting up or busy Status Blinking red Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular Blinking Slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 65 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 66: Max Br1 Pro (Cat-20)

    Blinking red Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular Blinking Slowly Connecting to network(s) Green Connected to network(s) Wi-Fi Indicators Disabled intermittent Wi-Fi / Wi-Fi Connected to wireless network(s) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 67 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Left LED Blinking Data is transferring No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 68: Max Br1 Pro 5G

    Blinking red Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular Blinking Slowly Connecting to network(s) Green Connected to network(s) Wi-Fi Indicators Disabled intermittent Wi-Fi / Wi-Fi Connected to wireless network(s) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 69 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Left LED Blinking Data is transferring No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 70: Max Br2 Pro

    Blinking red Boot up error Green Ready Cellular Indicators Disabled or no SIM card inserted Cellular Blinking Slowly Connecting to network(s) Green Connected to network(s) Wi-Fi Indicators Disabled intermittent Wi-Fi / Wi-Fi Connected to wireless network(s) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 71 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Left LED Blinking Data is transferring No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 72: Max Hotspot

    10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 73: Max Br1 Ip55

    LAN and Ethernet WAN Ports 1000Mbps Green LED 10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 74 Disabled or no SIM card inserted Blinking Connecting to network(s) in Standby Mode Green Connected to network(s) in Priority 1 (Active) LAN and WAN Indicators Powered-on device connected to Ethernet port Green No device connected to Ethernet port https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 75: Max Br2 Ip55

    Disabled Intermittent Blinking slowly Connecting to wireless network(s) Wi-Fi Blinking Connected to wireless network(s) with traffic Connected to wireless network(s) without traffic Cellular Indicators Disabled or no SIM card inserted Cellular Connecting or connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 76: Max Br1 Ip67

    10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring Port is not connected Port Type Auto MDI/MDI-X ports 2.38 MAX BR1 IP67 2.38.1 Panel Appearance https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 77: Max On-The-Go

    System initializing Status Booting up or busy Green Ready LAN and Ethernet WAN Ports 100 Mbps Green LED 10 Mbps Port is connected without traffic Orange LED Blinking Data is transferring Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 78: Speedfusion Engine

    2.40 SpeedFusion Engine 2.40.1 Panel Appearance 2.41 UBR LTE 2.41.1 Panel Appearance https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 79 Data is transferring No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports Cellular Indicators Disabled or no SIM card inserted Cellular Blinking Slowly Connecting to network(s) Green Connected to network(s) https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 80: Ubr Plus

    10 Mbps / 100 Mbps or port is not connected Port is connected without traffic Orange LED Blinking Data is transferring No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 81: Pdx

    Connected to network(s) 2.43 PDX 2.43.1 Panel Appearance 2.43.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Status Indicators No battery installed Charging Status Blinking red Low Battery Green Full Charged https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 82: Installation

    You must change the default password on the first successful logon. ● Password requirements are: A minimum of 10 lower AND upper case characters, ● including at least 1 number. When HTTP is selected, the URL will be redirected to HTTPS by default. ● https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 83 The Dashboard shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can change WAN connection priority and switch on/off the Wi-Fi AP. For further information on setting up these connections, please refer to Sections 8 and 9. https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 84: System

    Save button at the bottom of each page. The Apply Changes button causes the changes to be saved and applied. Please refer to this link. System Please refer to this link. Status Please refer to this link. Ignition Sensing Please refer to this link for the details of Ignition Sensing. https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 85: Appendix A: Restoration Of Factory Defaults

    Inbound / Outbound* Disabled UDP 500 VPN initiation IPsec Inbound / Outbound* Disabled Remote User UDP 500 L2TP Access Inbound Disabled Remote User UDP 1701 L2TP Access Inbound Disabled UDP 4500 L2TP Remote User Inbound Disabled https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 86 UDP 32015+N-1^ / TCP/UDP 4500+N-1^ - When using Sub-Tunnels, multiple ports are in use (1 for each Sub-Tunnel profile). ● The default UDP data ports used when using (N number of Sub-Tunnel profiles) are: 4500…4500+N-1, or (when port 4500 is in use by IPsec or L2TP/IPsec) 32015… 32015+N-1". https://www.peplink.com Copyright @ 2021 Peplink...

  • Page 87: Appendix D: Declaration

    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 88 CE Statement for Pepwave Routers ( MAX BR1 Mini for EC25-E) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 89 Copyright @ 2021 Peplink...
  • Page 90 This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 91 CE Statement for Pepwave Routers ( MAX BR1 Mini for MC7455) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 92 Copyright @ 2021 Peplink...
  • Page 93 This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 94 Cet équipement est conforme avec l'exposition aux radiations ISED définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre le radiateur et votre corps. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 95 L'exploitation est autorisee aux deux conditions suivantes 1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioelect rique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 96 Les types d'antenne non inclus dans cette liste, et dont le gain est superieur au gain maximal indique pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'emetteur. antenna type Omni-directional antenna gain 5.33 https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 97 (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 98 Cet équipement est conforme avec l'exposition aux radiations ISED définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre le radiateur et votre corps. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 99 CE Statement for Pepwave Routers ( MAX BR1 MK2 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 100 Copyright @ 2021 Peplink...
  • Page 101 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 102 FCC Radiation Exposure Statement (for MAX BR1 Classic ) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 103 20 cm entre le radiateur et votre corps. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement économique Canada. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 104 CE Statement for Pepwave Routers ( MAX BR1 Classic for MC7455) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 105 Copyright @ 2021 Peplink...
  • Page 106 This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 107 CE Statement for Pepwave Routers ( MAX BR1 Classic for EC25-E) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 108 Copyright @ 2021 Peplink...
  • Page 109 This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 110 (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 111 WIFI Antenna type Replacement Antenna WIFI Antenna gain 2.4GHz / 2.44 dBi , 5GH / 4.73 dBi LTE Antenna type Replacement Antenna LTE Antenna gain 4.38 dBi https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 112 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 113 CE Statement for Pepwave Routers ( MAX HD4 MBX For EM7565 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 114 Copyright @ 2021 Peplink...
  • Page 115 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 116 UK Statement for Pepwave Routers ( MAX HD4 MBX For EM7565 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 117 Copyright @ 2021 Peplink...
  • Page 118 CE Statement for Pepwave Routers ( MAX HD2 MBX / MAX HD4 MBX For LM960A18) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 119 Copyright @ 2021 Peplink...
  • Page 120 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 121 UK Statement for Pepwave Routers ( MAX HD2 MBX / MAX HD4 MBX For LM960A18) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 122 Copyright @ 2021 Peplink...
  • Page 123 CE Statement for Pepwave Routers (MAX HD2 MBX 5G / MAX HD4 MBX 5G For MV31-W) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 124 Copyright @ 2021 Peplink...
  • Page 125 WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 126 This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 127 UK Statement for Pepwave Routers (MAX HD2 MBX 5G / MAX HD4 MBX 5G For MV31-W) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 128 Copyright @ 2021 Peplink...
  • Page 129 L'exploitation est autorisee aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 130 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 131 Copyright @ 2021 Peplink...
  • Page 132 CE Statement for Pepwave Routers ( MAX HD2 For MC7455) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 133 Copyright @ 2021 Peplink...
  • Page 134 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 135 CE Statement for Pepwave Routers ( MAX HD2 For EM7565) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 136 Copyright @ 2021 Peplink...
  • Page 137 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 138 Recommended screw specification M3.5 x 20mm, head diameter 6mm, head thickness 2.4mm. For type 1, the device requires four screws for wall mounting. For type 2, the device requires two screws for wall mounting. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 139 Ensure to connect the power cord of power adapter to a socket-outlet with earthing. The MAX BR1 Mini is investigated to IEC TR 62102 as SELV (ES1) circuits and only connected to PoE without routing to the outside plant, including campus environment. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 140 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 141 Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. antenna type Omni-directional antenna gain for 2.4GHz 2.44 dBi https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 142 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 143 CE Statement for Pepwave Routers ( MAX BR1 Pro 5G) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 144 Copyright @ 2021 Peplink...
  • Page 145 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 146 UK Statement for Pepwave Routers ( MAX BR1 Pro 5G) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 147 Copyright @ 2021 Peplink...
  • Page 148 CE Statement for Pepwave Routers ( MAX BR1 Pro LTEA for EM7690) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 149 Copyright @ 2021 Peplink...
  • Page 150 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 151 UK Statement for Pepwave Routers ( MAX BR1 Pro LTEA for EM7690) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 152 Copyright @ 2021 Peplink...
  • Page 153 Industry Canada Statement ( MAX BR1 Mini Core ) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le present produit est conforme aux specifications techniques applicables a l'innovation, Science et Developpement economique Canada. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 154 Cet équipement est conforme avec l'exposition aux radiations ISED définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre le radiateur et votre corps. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 155 Industry Canada Statement (MAX BR1 Mini, IC: 20682-P1MT01) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement économique Canada. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 156 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. (iii) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 157 Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 3.15 dBi 5150 ~ 5250 MHz / 3.29 dBi 5725 ~ 5850 MHz / 4.76 dBi VCCI Class A Statement この装置は、クラスＡ機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことがあ ります。この場合には使用者が適切な対策を講ずるよう要求されることがあります。 VCCI-A https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 158 CE Statement for Pepwave Routers ( MAX BR1 Mini HW3 for EC25-E & LN920A6-WW ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 159 Copyright @ 2021 Peplink...
  • Page 160 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 161 UK Statement for Pepwave Routers ( MAX BR1 Mini HW3 for EC25-E & LN920A6-WW ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 162 Copyright @ 2021 Peplink...
  • Page 163 本設備- LTE 900 (Band 8) FDD支援LTE上行885MHz -915MHz \ 下行930MHz -960MHz。 本設備- LTE 700 (Band 28) FDD支援LTE上行703MHz -748MHz \ 下行758MHz -803MHz。 分時雙工(TDD)： 本設備- LTE 2600 (Band 38) TDD支援頻段(2570MHz～2620MHz)。 本設備- LTE 2600 (Band 41) TDD支援頻段(2500MHz～2690MHz)。 為避免電磁干擾，本產品不應安裝或使用於住宅環境。 如果更換不正確之電池型式會有爆炸的風險，請依製造商說明書處理用過之電池。 https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 164 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 22 centimeters between the radiator and your body. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 165 Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 166 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 167 CE Statement for Pepwave Routers ( MAX HD2 IP67 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 168 Copyright @ 2021 Peplink...
  • Page 169 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 170 CE Statement for Pepwave Routers ( MAX HD1 Dome ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 171 Copyright @ 2021 Peplink...
  • Page 172 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 173 UK Statement for Pepwave Routers ( MAX HD1 Dome ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 174 Copyright @ 2021 Peplink...
  • Page 175 CE Statement for Pepwave Routers ( MAX HD2 Dome ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 176 Copyright @ 2021 Peplink...
  • Page 177 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 178 CE Statement for Pepwave Routers ( MAX BR1 ESN ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 179 Copyright @ 2021 Peplink...
  • Page 180 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 181 Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex- empts de licence. L'exploitation est autorisee aux deux conditions suivantes (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 182 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. VCCI Class A Statement (MAX HD4) この装置は、クラスＡ機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことがあります。この場 合には使用者が適切な対策を講ずるよう要求されることがあります。 VCCI-A https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 183 CE Statement for Pepwave Routers ( MAX HD4 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 184 Copyright @ 2021 Peplink...
  • Page 185 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 186 CE Statement for Pepwave Routers ( MAX HD4 IP67 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 187 Copyright @ 2021 Peplink...
  • Page 188 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 189 CE Statement for Pepwave Routers ( SpeedFusion Engine ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 190 Copyright @ 2021 Peplink...
  • Page 191 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 192 Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired opera- tion of the device. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 193 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 194 CE Statement for Pepwave Routers ( MAX Transit / MAX Transit Duo For EM7565 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 195 Copyright @ 2021 Peplink...
  • Page 196 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 197 CE Statement for Pepwave Routers ( MAX Transit For LM960A18 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 198 Copyright @ 2021 Peplink...
  • Page 199 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 200 Cet équipement est conforme avec l'exposition aux radiations ISED définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre le radiateur et votre corps. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 201 Types d'antennes Replacement Antenna Gain d'antenne (en dBi) 5.33 dBi https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 202 CE Statement for Pepwave Routers ( MAX Transit Mini ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 203 Copyright @ 2021 Peplink...
  • Page 204 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 205 L'exploitation est autorisee aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 206 LAN-EL. (iii) En outre, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-a-d., qu'ils ont la priorite) pour les bande 5725-5850 MHz et https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 207 Cet equipement est conforme avec l'exposition aux radiations ISED definies pour un environnement non controle. Cet equipement doit etre installe et utilise a une distance minimum de 23 cm entre le radiateur et votre corps. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 208 CE Statement for Pepwave Routers ( MAX BR1 PRO / UBR LTE ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 209 Copyright @ 2021 Peplink...
  • Page 210 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 211 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 212 CE Statement for Pepwave Routers ( MAX BR1 IP55 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 213 Copyright @ 2021 Peplink...
  • Page 214 This equipment should be installed and operated with a minimum distance of 50cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 215 CE Statement for Pepwave Routers ( MAX BR2 IP55 ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 216 Copyright @ 2021 Peplink...
  • Page 217 This equipment should be installed and operated with a minimum distance of 50cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 218 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 219 Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre le radiateur et votre corps. Cet émetteur ne doit pas être colocalisées ou opérant en conjonction avec une autre antenne ou transmetteur. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 220 Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 221 Les types d'antenne non inclus dans cette liste qui ont un gain supérieur au gain maximum indiqué pour tout type répertorié sont strictement interdits pour une utilisation avec cet appareil. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 222 Industry Canada Statement (MAX Transit Pro E, IC: 20682-P1AX09) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement économique Canada. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 223 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. (iii) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 224 Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.10 dBi 5725 ~ 5850 MHz / 4.73 dBi https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 225 CE Statement for Pepwave Routers ( MAX Transit Pro E for LN920A12-WW) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 226 Copyright @ 2021 Peplink...
  • Page 227 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 228 This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement économique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 229 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. (iii) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 230 Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.73 dBi https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 231 CE Statement for Pepwave Routers ( MAX Transit Duo Pro for EM7421 & EM12-G ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 232 Copyright @ 2021 Peplink...
  • Page 233 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 234 UK Statement for Pepwave Routers ( MAX Transit Duo Pro for EM7421 & EM12-G ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 235 Copyright @ 2021 Peplink...
  • Page 236 Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement économique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 237 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. (iii) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 238 Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.73 dBi VCCI Class A Statement この装置は、クラスＡ機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことがあ ります。この場合には使用者が適切な対策を講ずるよう要求されることがあります。 VCCI-A https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 239 CE Statement for Pepwave Routers ( MAX BR2 Pro ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 240 Copyright @ 2021 Peplink...
  • Page 241 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 242 UK Statement for Pepwave Routers ( MAX BR2 Pro ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 243 Copyright @ 2021 Peplink...
  • Page 244 Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement économique Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 245 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. (iii) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 246 Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 2.44 dBi 5150 ~ 5250 MHz / 4.1 dBi 5725 ~ 5850 MHz / 4.54 dBi https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 247 CE Statement for Pepwave Routers ( UBR Plus ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 248 Copyright @ 2021 Peplink...
  • Page 249 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 250 UK Statement for Pepwave Routers ( UBR Plus ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 251 Copyright @ 2021 Peplink...
  • Page 252 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 253 En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5725-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 254 Type d'antenne WIFI : omnidirectionnelle Gain de l'antenne Wi-Fi : 2.4 GHz / 4.5 dBi 5725 ~ 5850 MHz / 4.7 dBi https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 255 CE Statement for Pepwave Routers ( MAX HD1 Dome Pro for MV31-W ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 256 Copyright @ 2021 Peplink...
  • Page 257 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 258 UK Statement for Pepwave Routers ( MAX HD1 Dome Pro for MV31-W ) https://www.peplink.com Copyright @ 2021 Peplink...
  • Page 259 Copyright @ 2021 Peplink...
  • Page 260 HD4 Media Fast MAX BR2 Pro Mini HD4 MBX Media Fast / MediaFast 200 Output 5V DC, 5V DC, 2A 5V DC, 2A 5V DC, 2A 5V DC, 2A 5V DC, 2A 5V DC, 2A Rating https://www.peplink.com Copyright @ 2021 Peplink...

This manual is also suitable for:

Pepwave 700Pepwave hd2Pepwave hd2 ip67Pepwave hd2 miniPepwave hd2 mbx 5gPepwave hd2 mbx ... Show all

Table of Contents