Upnp / Nat-Pmp Settings - peplink Pepwave MAX Series User Manual

16.1.1 UPnP / NAT-PMP Settings

UPnP and NAT-PMP are network protocols which allow a computer connected to the LAN port to
automatically configure the router to allow parties on the WAN port to connect to itself. That way, the
process of inbound port forwarding becomes automated.
When a computer creates a rule using these protocols, the specified TCP/UDP port of all WAN
connections' default IP address will be forwarded.
Check the corresponding box(es) to enable UPnP and/or NAT-PMP. Enable these features only if you
trust the computers connected to the LAN ports.
When the options are enabled, a table listing all the forwarded ports under these two protocols can be
found at Status>UPnP / NAT-PMP.
http://www.peplink.com 116 Copyright @ 2017 Pepwave