Bandwidth Bonding Speedfusiontm / Pepvpn; Pepvpn - peplink Pepwave MAX Series User Manual

TM
13 Bandwidth Bonding SpeedFusion

/ PepVPN

Pepwave bandwidth bonding SpeedFusionTM is our patented technology that enables our SD-WAN
routers to bond multiple Internet connections to increase site-to-site bandwidth and reliability.
SpeedFusion functionality securely connects your Pepwave router to another Pepwave or Peplink device
(Peplink Balance 210/310/380/580/710/1350 only). Data, voice, or video communications between these
locations are kept confidential across the public Internet.
TM
Bandwidth bonding SpeedFusion is specifically designed for multi-WAN environments. In case of
failures and network congestion at one or more WANs, other WANs can be used to continue carrying the
network traffic.
Different models of our SD-WAN routers have different numbers of site-to-site connections allowed.
End-users who need to have more site-to-site connections can purchase a SpeedFusion license to
increase the number of site-to-site connections allowed.
Pepwave routers can aggregate all WAN connections' bandwidth for routing SpeedFusion
TM
traffic.
Unless all the WAN connections of one site are down, Pepwave routers can keep the VPN up and
running.
VPN bandwidth bonding is supported in Firmware 5.1 or above. All available bandwidth will be utilized
to establish the VPN tunnel, and all traffic will be load balanced at packet level across all links. VPN
bandwidth bonding is enabled by default.
13.1 PepVPN
To configure PepVPN and SpeedFusion, navigate to Advanced>SpeedFusion™ or
Advanced>PepVPN.
http://www.peplink.com 93 Copyright @ 2017 Pepwave