Custom Rules For Outbound Policy - peplink Pepwave MAX Series User Manual

Note that some Pepwave routers provide only the Send All Traffic To setting here. See Section 12.1 for
details.
Outbound traffic from a source LAN device is routed through the same WAN connection regardless
High Application
of the destination Internet IP address and protocol. This option provides the highest application
Compatibility
compatibility.
Outbound traffic from a source LAN device to the same destination Internet IP address will be routed
Normal
through the same WAN connection persistently, regardless of protocol. This option provides high
Application
compatibility to most applications, and users still benefit from WAN link load balancing when
Compatibility
multiple Internet servers are accessed.
Outbound traffic behavior can be managed by defining rules in a custom rule table. A default rule
Custom
can be defined for connections that cannot be matched with any of the rules.
The default policy is Normal Application Compatibility.
Want to know more about creating outbound rules? Visit our YouTube Channel for a video tutorial!
http://www.peplink.com
Outbound Policy Settings
Tip
http://youtu.be/rKH4AS_bQnE
107 Copyright @ 2017 Pepwave