Ap Controller; Qos; Other Supported Features - peplink Pepwave MAX Series User Manual

● Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms
3.1.7

AP Controller

● Configure and manage Pepwave AP devices
● Review the status of connected APs
3.1.8

QoS

● Quality of service for different applications and custom protocols
● User group classification for different service levels
● Bandwidth usage control and monitoring on group- and user-level
● Application prioritization for custom protocols and DSL/cable optimization
3.2

Other Supported Features

● User-friendly web-based administration interface
● HTTP and HTTPS support for web admin interface
● Configurable web administration port and administrator password
● Firmware upgrades, configuration backups, ping, and traceroute via web admin interface
● Remote web-based configuration (via WAN and LAN interfaces)
● Time server synchronization
● SNMP
● Email notification
● Read-only user for web admin
● Shared IP drop-in mode
● Authentication and accounting by RADIUS server for web admin
● Built-in WINS servers*
● Syslog
● SIP passthrough
● PPTP packet passthrough
● Event log
● Active sessions
● Client list
● WINS client list *
● UPnP / NAT-PMP
● Real-time, hourly, daily, and monthly bandwidth usage reports and charts
● IPv6 support
http://www.peplink.com 12 Copyright @ 2017 Pepwave