Port Settings - peplink Pepwave MAX Series User Manual

Enable
Check this box to turn on DHCP relay. Click the
Enter the IP addresses of one or two DHCP servers in the provided fields. The DHCP servers entered
DHCP Server IP
here will receive relayed DHCP requests from the LAN. For active-passive DHCP server
Address
configurations, enter active and passive DHCP server relay IP addresses in DHCP Server 1 and
DHCP Server 2.
DCHP Option 82 includes device information as relay agent for the attached client when forwarding
DHCP Option 82
DHCP requests from client to server. This option also embeds the device's MAC address and
network name in circuit and remote IDs. Check this box to enable DHCP Option 82.
Once DHCP is set up, configure LAN Physical Settings, Static Route Settings, WINS Server
Settings, and DNS Proxy Settings as noted above.
9.2

Port Settings

To configure port settings, navigate to Network > Port Settings
On this screen, you can enable specific ports, as well as determine the speed of the LAN ports, whether
each port is a trunk or access port, can well as which VLAN each link belongs to, if any.
http://www.peplink.com
DHCP Relay Settings
icon to disable DHCP relay.
55 Copyright @ 2017 Pepwave