Captive Portal - peplink Pepwave MAX Series User Manual

9.3

Captive Portal

The captive portal serves as gateway that clients have to pass if they wish to access the internet using
your router. To configure, navigate to Network>LAN>Captive Portal.
Enable
Hostname
Access Mode
RADIUS Server
http://www.peplink.com
Captive Portal Settings
Check Enable and then, optionally, select the LANs/VLANs that will use the captive portal.
To customize the portal's form submission and redirection URL, enter a new URL in this field.
To reset the URL to factory settings, click Default.
Click Open Access to allow clients to freely access your router. Click User Authentication to
force your clients to authenticate before accessing your router.
This authenticates your clients through a RADIUS server. After selecting this option, you will see
the following fields:
Fill in the necessary information to complete your connection to the server and enable
authentication.
56 Copyright @ 2017 Pepwave