Email Notification - peplink Pepwave MAX Series User Manual

25.5 Email Notification

Email notification functionality provides a system administrator with up-to-date information on network
status. The settings for configuring email notifications are found at System>Email Notification.
This setting specifies whether or not to enable email notification. If Enable is checked, the Pepwave
Email
router will send email messages to system administrators when the WAN status changes or when
new firmware is available. If Enable is not checked, email notification is disabled and the Pepwave
Notification
router will not send email messages.
This setting specifies the SMTP server to be used for sending email. If the server requires
SMTP Server
authentication, check Require authentication.
Check the box to enable SMTPS. When the box is checked, SMTP Port will be changed to 465
SSL Encryption
automatically.
This field is for specifying the SMTP port number. By default, this is set to 25; when SSL
SMTP Port
Encryption is checked, the default port number will be set to 465. You may customize the port
number by editing this field. Click Default to restore the number to its default setting.
SMTP User
This setting specifies the SMTP username and password while sending email. These options are
shown only if Require authentication is checked in the SMTP Server setting.
Name / Password
http://www.peplink.com
Email Notification Settings
171 Copyright @ 2017 Pepwave