Lan; Vpn; Firewall; Captive Portal - peplink Pepwave MAX Series User Manual

3.1.2

LAN

● Wi-Fi AP
● Ethernet LAN ports
● DHCP server on LAN
● Extended DHCP option support
● Static routing rules
● VLAN on LAN support
3.1.3

VPN

● PepVPN with SpeedFusion
● PepVPN performance analyzer
● X.509 certificate support
● VPN load balancing and failover among selected WAN connections
● Bandwidth bonding and failover among selected WAN connections
● IPsec VPN for network-to-network connections (works with Cisco and Juniper only)
● Ability to route Internet traffic to a remote VPN peer
● Optional pre-shared key setting
● SpeedFusion TM
throughput, ping, and traceroute tests
● PPTP server
● PPTP and IPsec passthrough
3.1.4

Firewall

● Outbound (LAN to WAN) firewall rules
● Inbound (WAN to LAN) firewall rules per WAN connection
● Intrusion detection and prevention
● Specification of NAT mappings
● Outbound firewall rules can be defined by destination domain name
3.1.5

Captive Portal

● Splash screen of open networks, login page for secure networks
● Customizable built-in captive portal
● Supports linking to outside page for captive portal
3.1.6

Outbound Policy

● Link load distribution per TCP/UDP service
● Persistent routing for specified source and/or destination IP addresses per TCP/UDP service
● Traffic prioritization and DSL optimization
http://www.peplink.com
TM
11 Copyright @ 2017 Pepwave