Miscellaneous Settings; High Availability - peplink Pepwave MAX Series User Manual

VPN Type
Preshared Key
Listen On
Connect to
Network
Authentication
User Accounts

Miscellaneous Settings

The miscellaneous settings include configuration for high availability, PPTP server, service forwarding,
and service passthrough.

21.1 High Availability

Many Pepwave routers support high availability (HA) configurations via an open standard virtual router
redundancy protocol (VRRP, RFC 3768). In an HA configuration, two Pepwave routers provide
redundancy and failover in a master-slave arrangement. In the event that the master unit is down, the
slave unit becomes active. High availability will be disabled automatically where there is a drop-in
connection configured on a LAN bypass port.
http://www.peplink.com
Determine whether remote devices can connect to the Balance using L2TP with IPsec or PPTP. For
greater security, we recommend you connect using L2TP with IPsec.
Enter your preshared key in the text field. Please note that remote devices will need this preshared
key to access the Balance.
This setting is for specifying the WAN IP addresses where the PPTP server of the router should
listen on.
Select the VLAN network for remote users to enable remote user access on.
Determine the method of authenticating remote users.
This setting allows you to define the PPTP User Accounts. Click Add to input username and
password to create an account. After adding the user accounts, you can click on a username to edit
the account password. Click the button X to delete the account in its corresponding row.
Click the button to switch to enters user accounts by pasting the information in.CSV format.
133 Copyright @ 2017 Pepwave