L2Tp Connection - peplink PEPWAVE MAX BR2 Pro User Manual

9.1.4 L2TP Connection

L2TP has all the compatibility and convenience of PPTP with greater security. Combine this
with IPsec for a good balance between ease of use and security.
L2TP Username /
Password
Confirm L2TP
Password
Server IP
Address / Host
Address Type
DNS Servers
https://www.peplink.com
L2TP Settings
Enter the required information in these fields in order to connect via L2TP to
your ISP.
The parameter values are determined by and can be obtained from your ISP.
Verify your password by entering it again in this field.
L2TP server address is a parameter which is provided by your ISP.
Note: Leave this field blank unless it is provided by your ISP.
Your ISP will also indicate whether the server IP address is Dynamic or Static.
Please click the appropriate value.
Each ISP may provide a set of DNS servers for DNS lookups. This setting
specifies the
DNS (Domain Name System) servers to be used when a DNS lookup is routed
through this
connection.
Selecting Obtain DNS server address automatically results in the DNS
servers assigned
by the PPPoE server to be used for outbound DNS lookups over the WAN
connection.
(The DNS servers are obtained along with the WAN IP address assigned from
42 Copyright @ 2019 Pepwave