Inbound Access; Port Forwarding Service - peplink Pepwave MAX Series User Manual

16 Inbound Access

16.1 Port Forwarding Service

Pepwave routers can act as a firewall that blocks, by default, all inbound access from the Internet. By
using port forwarding, Internet users can access servers behind the Pepwave router. Inbound port
forwarding rules can be defined at Advanced>Port Forwarding.
To define a new service, click Add Service.
This setting specifies whether the inbound service takes effect. When Enable is checked, the inbound
service takes effect: traffic is matched and actions are taken by the Pepwave router based on the other
Enable
parameters of the rule. When this setting is disabled, the inbound service does not take effect: the
Pepwave router disregards the other parameters of the rule.
This setting identifies the service to the system administrator. Valid values for this setting consist of only
Service Name
alphanumeric and underscore "_" characters.
http://www.peplink.com
Port Forwarding Settings
114 Copyright @ 2017 Pepwave