Restoration of Factory Defaults
Appendix A.
To restore the factory default settings on a Pepwave router, follow the steps below:
1.
Locate the reset button on the front or back panel of the Pepwave router.
2.
With a paper clip, press the reset button and hold it for at least 10 seconds, until the unit reboots
itself.
After the Pepwave router finishes rebooting, the factory default settings will be restored.
All previous configurations and bandwidth usage data will be lost after restoring factory default settings. Regular backup of
configuration settings is strongly recommended.
http://www.peplink.com
Important Note
197
Copyright @ 2017 Pepwave