Ospf & Ripv2 - peplink Pepwave MAX Series User Manual

20 OSPF & RIPv2
The Peplink Balance supports OSPF and RIPv2 dynamic routing protocols. Click the Network tab from
the top bar, and then click the OSPF & RIPv2 item on the sidebar to reach the following menu:
This field determines the ID of the router. By default, this is specified as the LAN IP address. If you
Router ID
want to specify your own ID, enter it in the Custom field.
This is an overview of the OSPFv2 areas you have defined. Click on the area name to configure it.
Area
To set a new area, click Add. To delete an existing area, click
http://www.peplink.com
OSPF
129
.
Copyright @ 2017 Pepwave