Algorithm: Least Used; Algorithm: Lowest Latency - peplink Pepwave MAX Series User Manual

Drag and drop to specify the order of WAN connections to be used for routing traffic. Only the highest
priority healthy connection that is not in full load will be used.

15.2.6 Algorithm: Least Used

The traffic matching this rule will be routed through the healthy WAN connection that is selected in
Connection and has the most available download bandwidth. The available download bandwidth of a
WAN connection is calculated from the total download bandwidth specified on the WAN settings page
and the current download usage. The available bandwidth and WAN selection is determined every time
an IP session is made.

15.2.7 Algorithm: Lowest Latency

The traffic matching this rule will be routed through the healthy WAN connection that is selected in
Connection and has the lowest latency. Latency checking packets are issued periodically to a nearby
router of each WAN connection to determine its latency value. The latency of a WAN is the packet
round trip time of the WAN connection. Additional network usage may be incurred as a result.
http://www.peplink.com 112 Copyright @ 2017 Pepwave