L2Tp Connection - peplink Pepwave MAX 700 User Manual

Service Name
(Optional)
IP Address
(Optional)
DNS Servers

9.1.4 L2TP Connection

L2TP has all the compatibility and convenience of PPTP with greater security. Combine this
with IPsec for a good balance between ease of use and security.
L2TP Username /
Password
Confirm L2TP
Password
Server IP
https://www.peplink.com
Service name is provided by the ISP.
Note: Leave this field blank unless it is provided by your ISP.
If your ISP provides a PPPoE IP address, enter it here.
Note: Leave this field blank unless it is provided by your ISP.
Each ISP may provide a set of DNS servers for DNS lookups. This setting
specifies the DNS (Domain Name System) servers to be used when a DNS
lookup is routed through this connection. Selecting Obtain DNS server
address automatically results in the DNS servers being assigned by the WAN
DHCP server to be used for outbound DNS lookups over the connection. (The
DNS servers are obtained along with the WAN IP address assigned from the
DHCP server.) When Use the following DNS server address(es) is selected,
you may enter custom DNS server addresses for this WAN connection into the
DNS Server 1 and DNS Server 2 fields.
L2TP Settings
Enter the required information in these fields in order to connect via L2TP to your
ISP.
The parameter values are determined by and can be obtained from your ISP.
Verify your password by entering it again in this field.
L2TP server address is a parameter which is provided by your ISP.
111 Copyright @ 2021 Pepwave