Configuring The Lan Interface(S); Basic Settings - peplink Pepwave MAX Series User Manual

9

Configuring the LAN Interface(s)

9.1

Basic Settings

LAN interface settings are located at Network>LAN>Network Settings. Navigating to that page will
result in the following dashboard:
This represents the LAN interfaces that are active on your router (including VLAN). A grey "X" means
that the VLAN is used in other settings and cannot be deleted. You can find which settings are using the
VLAN by hovering over the grey "X".
Alternatively, a red "X" means that there are no settings using the VLAN. You can delete that VLAN by
clicking the red "X"
Clicking any of the existing LAN interfaces (or creating a new one) will result in the following
IP Address
The IP address and subnet mask of the Pepwave router on the LAN.
http://www.peplink.com
IP Settings
45 Copyright @ 2017 Pepwave