peplink PEPWAVE Balance One User Manual

For more information, please visit peplink.com

Hide thumbs

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

Table of Contents

Quick Links

Balance and MediaFast

User Manual (Declaration)

Peplink Products:

One / One Core / Two / 20 / 20X / 30 LTE / 30 Pro / 210 / 310 / 310X / 310 5G / 310 Fiber 5G /

305 / 380 / 380X / 580 / 580X / 710 / 1350 / 2500 / 2500 EC/ EPX / SDX / SDX Pro / MediaFast

200 / 500 / 750

Peplink Balance Firmware 8.3.0

September 2023

Specifications are subject to change without notice.

Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Table of Contents

Need help?

Do you have a question about the PEPWAVE Balance One and is the answer not in the manual?

Questions and answers

Summary of Contents for peplink PEPWAVE Balance One

Page 1 Specifications are subject to change without notice. Copyright © 2021 Peplink Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Peplink International Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
Page 2: Table Of Contents
4.6 Built-In Remote User VPN Support 4.7 LACP NIC Bonding 4.8 KVM Virtualization 4.9 DPI Engine 4.10 NetFlow 4.11 Wi-Fi Air Monitoring 4.12 SP Default Configuration 4.13 Peplink Relay 4.14 DNS over HTTPS (DoH) 4.15 Peplink InTouch 4.16 Synergy Mode https://www.peplink.com Copyright @ 2022 Peplink...
Page 3 4.17 Virtual WAN on VLAN 5 Package Contents 5.1 Peplink Balance One/Two 5.2 Peplink Balance 20/30/30 LTE/30 Pro/50 5.3 Peplink Balance 20X 5.4 Peplink Balance 210/310 5.5 Peplink Balance 310X 5.6 Peplink Balance 310 5G 5.7 Peplink Balance 310 Fiber 5G 5.8 Peplink Balance 305/380/580/710/1350/2500/2500 EC...
Page 4 Appendix A. Restoration of Factory Defaults Appendix B. Routing under DHCP, Static IP, and PPPoE Appendix C. FusionSIM Manual Appendix D. Case studies Appendix E. Overview of ports used by Peplink SD-WAN routers and other Peplink services 81 Appendix F. Troubleshooting Appendix G. Declaration https://www.peplink.com...
Page 5: Introduction And Scope
We have two key WAN virtualization technologies, Intelligent load balancing for Internet access and SpeedFusion VPN Bonding for secure branch to branch connectivity. The Peplink MediaFast series are a range of routers capable of content caching. Designed with education and entertainment in mind, MediaFast downloads and accelerates video, iTunes iOS updates, app downloads, and other content for uninterrupted learning and fun anytime.
Page 6: Glossary
The manual covers setting up your Peplink Balance or MediaFast and provides a collection of case studies detailing the advanced features of the Peplink Balance. Glossary The following terms, acronyms, and abbreviations are frequently used in this manual: Term Definition 3rd generation standards for wireless communications (e.g., HSDPA)
Page 7: Product Comparison Charts
210+ Refers to Peplink Balance 210/310/380/580/710/1350/2500/2500 EC 380+ Refers to Peplink Balance 380/580/710/1350/2500/2500 EC Product Comparison Charts Balance Routers (for Small Oﬃce / Branch) 30 LTE 30 PRO 310X BPL-021X- BPL-031-LT BPL-031-L BPL-310 Product Code BPL-021 BPL-ONE BPL-TWO BPL-210 Capacity...
Page 8: Balance Routers (For For Enterprise / Headquarters)
5000-20 10000-200 50-500 50-500 50-500 50-500 300-1000 300-1000 ed Users 000+ Stateful 2.5Gb Firewall 1Gbps 2.5Gbps 1Gbps 3Gbps 1.5Gbps 4Gbps1 5Gbps 8Gbps 30Gbps Throughput A full product comparison for Balance routers is available at: http://www.peplink.com/products/balance/model-comparison/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 9: Mediafast Routers
292 x 177 x 44 mm 431 x 305 x 44 mm 426 x 365 x 44 mm Gross Weight 2.8 kg 6.6 kg 5.5 kgs A full product comparison for MediaFast routers is available at: https://www.peplink.com/products/mediafast-specifications/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 10: Product Features
Product Features Peplink Balance Series products enable all LAN users to share broadband Internet connections and provide advanced features to enhance Internet access. The following is a list of supported features: ● Multiple public IP support (DHCP, PPPoE, static IP address) ●...
Page 11: Vpn
Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms ● Time-based scheduling AP Controller ● Configure and manage Pepwave AP devices ● Review the status of connected AP ● Quality of service for different applications and custom protocols https://www.peplink.com Copyright @ 2022 Peplink...
Page 12: Firewall
Firmware upgrades, configuration backups, ping, and traceroute via web administration interface ● Remote web-based configuration (via WAN and LAN interfaces) ● Remote reporting to Peplink Balance reporting server ● Hardware high availability via VRRP, with automatic configuration synchronization ● Real-time, hourly, daily and monthly bandwidth usage reports and charts ●...
Page 13 PPTP packet passthrough ● Active sessions ● Active client list ● WINS client list ● UPnP / NAT-PMP ● Event log is persistent across reboots ● IPv6 support ● Support for USB tethering on Android phones https://www.peplink.com Copyright @ 2022 Peplink...
Page 14: Advanced Feature Summary
Drop-in Mode , you can conveniently install your Peplink router without making any changes to your network. For any reason your Peplink router looses power, the LAN Bypass will safely and automatically bypass the Peplink router to resume your original network connection.
Page 15: Per-User Bandwidth Control
High Availability via VRRP When your organization has a corporate requirement demanding the highest availability with no single point of failure, you can deploy two Peplink routers in High Availability mode . With High Availability mode, the second device will take over when needed.
Page 16: Usb Modem And Android Tethering
USB Modem and Android Tethering For increased WAN diversity, plug in a USB LTE modem as backup. Peplink routers are compatible with over 200 modem types . You can also tether to smartphones running Android 4.1.X and above. By default, the USB port is “USB Modem” mode. If you need to use it to connect to USB Ethernet Adapter, you need to change it to “USB Ethernet”...
Page 17: Lacp Nic Bonding
Click here for the full instructions on how to set up KVM with USB Storage DPI Engine The DPI report written in the updated KB article will show further information on InControl2 through breaking down application categories into subcategories. https://forum.peplink.com/t/ic2-deep-packet-inspection-dpi-reports-and-everything-you-need-to-k now-about-it/10151/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 18: Netflow
Internet, allowing access to previously restricted applications experienced with the public SpeedFusion Cloud nodes. Available as an add-on for your home router or as an upgradable license to your Peplink router, SFC Relay is sure to impress you and any peers you give access to.
Page 19: Dns Over Https (Doh)
SpeedFusion Connect (formerly known as SpeedFusion Cloud) data plan. This service extends a network administrator’s ability to reach any device UI backed by a Peplink/Pepwave router. To configure InTouch, all you need is a valid InControl 2 subscription, a SpeedFusion Connect data plan, and a Peplink/Pepwave router (which requires the latest 8.2.0 firmware).
Page 20: Package Contents
Package Contents The contents of Peplink Balance product packages are as follows: Peplink Balance One/Two ● Peplink Balance One/Two ● Power adapter ● Information slip Peplink Balance 20/30/30 LTE/30 Pro/50 ● Peplink Balance 20/30/30 LTE/30 Pro/50 ● Power adapter ●...
Page 21: Peplink Balance 310 5G
● Balance 310 5G ● Power adapter ● Power cord ● 4x Rubber foot ● 6x Cellular Antenna Peplink Balance 310 Fiber 5G ● Balance 310 Fiber 5G ● Power adapter ● Power cord ● 4x Rubber foot ● 4x Cellular Antenna ●...
Page 22: Peplink Epx
● SDX Base Chassis ● 1U 19″ Rackmount Chassis 5.14 Peplink SDX Pro ● SDX Pro Base Chassis ● 1U 19″ Rack-mount Chassis ● 1x Rubber Foot Pack ● 2x Power Cords ● 1x L-mount Set https://www.peplink.com Copyright @ 2022 Peplink...
Page 23: Peplink Balance Overview
OFF – 10 / 100 Mbps or port is not connected Blinking – Data is transferring Orange LED OFF – No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 24: Peplink Balance Two
Wi-Fi Indicators Disabled Wi-Fi Green Ready USB Port USB Ports For future functionality Peplink Balance Two 6.2.1 Panel Appearance https://www.peplink.com Copyright @ 2022 Peplink...
Page 25: Peplink Balance
Orange LED OFF – No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports USB Port USB Ports For connecting a 4G/3G USB modem Peplink Balance 20 6.3.1 Panel Appearance https://www.peplink.com Copyright @ 2022 Peplink...
Page 26 ON – 10 / 100 / 1000 Mbps Blinking – Data is transferring Orange LED OFF – No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports USB Port USB Ports For connecting a 4G/3G USB modem https://www.peplink.com Copyright @ 2022 Peplink...
Page 27: Peplink Balance 20X
OFF – 10 / 100 Mbps or port is not connected Blinking – Data is transferring Orange LED OFF – No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports Wi-Fi AP Indicators Disabled Wi-Fi AP Enabled https://www.peplink.com Copyright @ 2022 Peplink...
Page 28 Downlink / Uplink 300Mbps/50Mbps (CAT-6) Datarate 600Mbps/150Mbps (CAT-12) Power Consumption Weight 0.83 pounds | 375 grams 1xLTE-A Module Interface 1x Embedded LTE-A Cellular Modems with Redundant SIM Slots Antenna 4x SMA Cellular Antenna Connectors Connectors https://www.peplink.com Copyright @ 2022 Peplink...
Page 29 Downlink / Uplink 1.2 Gbps/150 Mbps (CAT-18) Datarate Power Consumption Weight 0.83 pounds | 375 grams 1x VDSL Module 1x RJ11 Connector, Interface 1x Status LED Power Consumption Weight 0.44 pounds | 200 grams https://www.peplink.com Copyright @ 2022 Peplink...
Page 30: Peplink Balance 30 Lte
Peplink Balance 30 LTE 6.5.1 Panel Appearance 6.5.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Power and Status Indicators OFF – Power off Power Green – Power on OFF – Upgrading firmware – Booting up or busy...
Page 31: Peplink Balance 30 Pro
Connecting to wireless network Connected to wireless network USB Port USB Ports For connecting a 4G/3G USB modem Peplink Balance 30 Pro 6.6.1 Panel Appearance 6.6.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Power and Status Indicators OFF –...
Page 32: Peplink Balance
Wi-Fi AP Enabled Cellular WAN Indicators Disabled Cellular Blinking slowly Connecting to wireless network Connected to wireless network USB Port USB Ports For connecting a 4G/3G USB modem Peplink Balance 50 6.7.1 Front Panel Appearance https://www.peplink.com Copyright @ 2022 Peplink...
Page 33 ON – 10 / 100 /1000 Mbps Blinking – Data is transferring Orange LED OFF – No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports USB Port USB Ports For connecting a 4G/3G USB modem https://www.peplink.com Copyright @ 2022 Peplink...
Page 34: Peplink Balance
LAN and WAN Ports Green LED ON – 10 / 100 / 1000 Mbps Blinking – Data is transferring Orange LED OFF – No data is being transferred or port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 35 Right LED GREEN – 100 Mbps OFF – 10 Mbps Solid – Port is connected without traffic Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 36 – Booting up or busy Status Blinking red – Boot up error Green – Ready LAN and WAN Ports Green LED ON – 10 / 100 / 1000 Mbps Orange LED Blinking – Data is transferring https://www.peplink.com Copyright @ 2022 Peplink...
Page 37: Peplink Balance 310X
The statuses indicated by the front panel LEDs are as follows: Power and Status Indicators OFF – Power off Power Green – Power on OFF – Upgrading firmware – Booting up or busy Status Blinking red – Boot up error Green – Ready https://www.peplink.com Copyright @ 2022 Peplink...
Page 38: Peplink Balance 310 5G
Blinking slowly Connecting to wireless network Connected to wireless network Wi-Fi AP Indicators Disabled Wi-Fi AP Enabled USB Port USB Ports For connecting a 4G/3G USB modem 6.12 Peplink Balance 310 5G 6.12.1 Front Panel Appearance https://www.peplink.com Copyright @ 2022 Peplink...
Page 39 – 1000 Mbps Right LED ORANGE - 100 Mbps OFF – 10 Mbps or port is not connected Blinking – Data is transferring Left LED OFF – Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 40: Peplink Balance 310 Fiber 5G
Connected to wireless network USB Port USB Ports For connecting a 4G/3G USB modem 6.13 Peplink Balance 310 Fiber 5G Front Panel Appearance 6.13.1 6.13.2 LED Indicators The statuses indicated by the front panel LEDs are as follows: Power and Status Indicators OFF –...
Page 41: Peplink Balance
Cellular Blinking slowly Connecting to wireless network Connected to wireless network Wi-Fi AP Indicators Disabled Wi-Fi AP Enabled USB Port USB Ports For connecting a 4G/3G USB modem 6.14 Peplink Balance 380 6.14.1 Panel Appearance https://www.peplink.com Copyright @ 2022 Peplink...
Page 42: Peplink Balance 380X
OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console and USB Ports Console Port Reserved for engineering use USB Ports For connecting a 4G/3G USB modem 6.15 Peplink Balance 380X 6.15.1 Panel Appearance https://www.peplink.com Copyright @ 2022 Peplink...
Page 43 Solid – Port is connected without traffic Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console and USB Ports Console Port Reserved for engineering use https://www.peplink.com Copyright @ 2022 Peplink...
Page 44 Weight 0.83 pounds | 375 grams 1xLTE-A Module Interface 1x Embedded LTE-A Cellular Modems with Redundant SIM Slots Antenna 4x SMA Cellular Antenna Connectors Connectors Downlink / Uplink 1.2 Gbps/150 Mbps (CAT-18) Datarate Power Consumption https://www.peplink.com Copyright @ 2022 Peplink...
Page 45: Peplink Balance
Right LED Green – 100 Mbps OFF – 10 Mbps Solid – Port is connected without traffic Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 46: Peplink Balance 580X
The statuses indicated by the front panel LEDs are as follows: Power and Status Indicators OFF – Power off Power LED Green – Power on LAN Port, WAN 1 – 5 Ports Green – 1000 Mbps Right LED OFF – 10 / 100 Mbps https://www.peplink.com Copyright @ 2022 Peplink...
Page 47 1x LTEA Module Interface 1x Embedded LTE-A Cellular Modems with Redundant SIM Slots Antenna 2x SMA Cellular Antenna Connectors Connectors Downlink / Uplink 300Mbps/50Mbps (CAT-6) Datarate 600Mbps/150Mbps (CAT-12) Power Consumption Weight 0.83 pounds | 375 grams https://www.peplink.com Copyright @ 2022 Peplink...
Page 48: Peplink Balance
1x Embedded LTE-A Cellular Modems with Redundant SIM Slots Antenna 4x SMA Cellular Antenna Connectors Connectors Downlink / Uplink 1.2 Gbps/150 Mbps (CAT-18) Datarate Power Consumption Weight 0.83 pounds | 375 grams 6.18 Peplink Balance 710 6.18.1 Front Panel Appearance https://www.peplink.com Copyright @ 2022 Peplink...
Page 49 Orange LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting a 4G/3G USB modem https://www.peplink.com Copyright @ 2022 Peplink...
Page 50: Peplink Balance 1350
Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting a 4G/3G USB modem https://www.peplink.com Copyright @ 2022 Peplink...
Page 51: Peplink Balance 2500
Right LED Green – 100 Mbps OFF – 10 Mbps Solid – Port is connected without traffic Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 52: Peplink Balance 2500 Ec
Console Port Reserved for engineering use USB Ports For connecting a 4G/3G USB modem 6.21 Peplink Balance 2500 EC 6.21.1 Panel Appearance 6.21.2 LED Indicators Status indicated in the front panel is as follows: LED Indicator OFF – Power off...
Page 53: Peplink Mediafast Overview
For connecting a 4G/3G USB modem Peplink MediaFast Overview Peplink MediaFast 200 7.1.1 Panel Appearance 7.1.2 LED Indicators Status indicated in the front panel is as follows: LED Indicator OFF – Power off Power LED Green – Power on https://www.peplink.com Copyright @ 2022 Peplink...
Page 54 Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting 4G/3G USB modems https://www.peplink.com Copyright @ 2022 Peplink...
Page 55: Peplink Mediafast
Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting 4G/3G USB modems https://www.peplink.com Copyright @ 2022 Peplink...
Page 56 Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console & USB Ports Console Port Reserved for engineering use USB Ports For connecting 4G/3G USB modems https://www.peplink.com Copyright @ 2022 Peplink...
Page 57: Peplink Flex-Module Supported Models
Peplink Flex-Module Supported Models Peplink EPX The EPX is a rapidly deployable, powerful, and versatile SD-WAN router that connects a wide range of WAN options from LTE-A, satellite modems, to fixed line networks this can be used simultaneously to allow bonding using our SpeedFusion technology.
Page 58 Panel Appearance 8.1.2 https://www.peplink.com Copyright @ 2022 Peplink...
Page 59 Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console & USB Ports CLI Console connection Console Port For connecting a 4G/3G USB modem USB Ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 60: Peplink Sdx
11.7 pounds - 5.3 kilograms Operating Temperature 32° – 104°F (0° – 40°C) Humidity 5% – 90% (non-condensing) Certifications FCC, IC, CE * 80W consumption for the main chassis, 20W consumption for the optional module. https://www.peplink.com Copyright @ 2022 Peplink...
Page 61 WAN Ports Green – 1000 Mbps Right LED OFF – 10 Mbps / 100 Mbps or the port is not connected Solid – Port is connected without traffic Left LED Blinking – Data is transferring https://www.peplink.com Copyright @ 2022 Peplink...
Page 62 OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console, MGMT & USB Ports CLI console connection Console Port For connecting 4G/3G USB modems for additional WAN connections USB Ports Management port MGMT Port https://www.peplink.com Copyright @ 2022 Peplink...
Page 63: Peplink Sdx Pro
15.9 pounds - 7.2 kilograms Operating Temperature 32° – 104°F (0° – 40°C) Humidity 10% – 85% (non-condensing) Certifications FCC, IC, CE * 140W consumption for the main chassis, 20W consumption for the optional module. https://www.peplink.com Copyright @ 2022 Peplink...
Page 64 OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console, MGMT & USB Ports CLI console connection Console Port For connecting 4G/3G USB modems for additional WAN connections USB Ports Management port MGMT Port https://www.peplink.com Copyright @ 2022 Peplink...
Page 65: Flex Module Expansion Modules
Right LED Green – PoE enabled OFF – PoE is disabled Solid – Port is connected without traffic Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 66 8.4.2 4x SFP+ Module (EXM-4F) 4x SFP+ Module Interface 4x SFP+ Ports * Power Consumption 4.1 x 7.4 x 1.5 inches Dimensions 103 x 188 x 38 mm Weight 0.83 pounds (375 grams) https://www.peplink.com Copyright @ 2022 Peplink...
Page 67 3x Embedded LTE-A Cellular Modems with Redundant SIM Slots 6x SMA Cellular Antenna Connectors Antenna Connectors 1x SMA GPS Antenna Connector Power Consumption 4.1 x 7.4 x 1.5 inches Dimensions 103 x 188 x 38 mm Weight 0.83 pounds (375 grams) https://www.peplink.com Copyright @ 2022 Peplink...
Page 68 4x Embedded LTE-A Cellular Modems with Redundant SIM Slots 8x SMA Cellular Antenna Connectors Antenna Connectors 1x SMA GPS Antenna Connector Power Consumption 4.1 x 7.4 x 1.5 inches Dimensions 103 x 188 x 38 mm Weight 0.83 pounds (375 grams) https://www.peplink.com Copyright @ 2022 Peplink...
Page 69 2x Embedded LTE-A Cellular Modems with Redundant 4FF Nano SIM Slots 8x SMA Cellular Antenna Connectors Antenna Connectors 1x SMA GPS Antenna Connector Power Consumption 4.1 x 7.4 x 1.5 inches Dimensions 103 x 188 x 38 mm Weight 0.83 pounds (375 grams) https://www.peplink.com Copyright @ 2022 Peplink...
Page 70 * Compatible with EPX, SDX Pro SIM Injector FlexModule SIM Slot Capacity 56 4FF Nano SIM Cards Power Consumption 4.1 x 7.4 x 1.5 inches Dimensions 103 x 188 x 38 mm Weight 1.30 pounds (600 grams) https://www.peplink.com Copyright @ 2022 Peplink...
Page 71 2x Embedded Cellular Modems with Redundant 4FF Nano SIM Slots 8x SMA Cellular Antenna Connectors Antenna Connectors 1x SMA GPS Antenna Connector Power Consumption 4.1 x 7.4 x 1.5 inches Dimensions 103 x 188 x 38 mm Weight 0.83 pounds (375 grams) https://www.peplink.com Copyright @ 2022 Peplink...
Page 72: Oled Display Menu
(to restore factory defaults) > LAN config > Port speed (shows port speed: Auto, 10baseT-FD, 10baseT-HD, > LAN 100baseTx-FD, 100baseTx-HD, 1000baseTx-FD) > WAN1 > WAN2 > WAN3* *Layout continues as such for all available WAN ports https://www.peplink.com Copyright @ 2022 Peplink...
Page 73: Installation
Constructing the Network At the high level, construct the network according to the following steps: With an Ethernet cable, connect a computer to one of the LAN ports on the Peplink Balance. For Peplink Balance models that support multiple connections, repeat with different cables connect up to 4 computers.
Page 74: Appendix A. Restoration Of Factory Defaults
When the Peplink Balance is operating under NAT mode, the source IP addresses of outgoing IP packets are translated to the WAN IP address of the Peplink Balance. With NAT, all LAN devices share the same WAN IP address to access the Internet (i.e., the WAN IP address of the Peplink Balance).
Page 75 Routing Via IP Forwarding When the Peplink Balance is operating under IP forwarding mode, the IP addresses of IP packets are unchanged; the Peplink Balance forwards both inbound and outbound IP packets without changing their IP addresses. The following figure shows the packet flow in IP forwarding mode: https://www.peplink.com...
Page 77: Appendix C. Fusionsim Manual
FusionSIM manual including various application scenarios. Appendix D. Case studies Please follow this link for details on various case studies using Peplink routers. Appendix E. Overview of ports used by Peplink SD-WAN routers and other Peplink services Default Port...
Page 78 (1 for each Sub-Tunnel profile). ● The default UDP data ports used when using (N number of Sub-Tunnel profiles) are: 4500…4500+N-1, or (when port 4500 is in use by IPsec or L2TP/IPsec) 32015… 32015+N-1". https://www.peplink.com Copyright @ 2022 Peplink...
Page 79: Appendix F. Troubleshooting
What can I do if I suspect a problem on my LAN connection? Solution You can test the LAN connection using ping. For example, if you are using DOS/Windows, at the command prompt, type ping 192.168.1.1. This pings the Peplink Balance device (provided https://www.peplink.com Copyright @ 2022 Peplink...
Page 80 You can test the WAN connection using ping, as in the solution to Problem 4. As we want to isolate the problems from the LAN, ping will be performed from the Peplink Balance. By using Ping / Traceroute under the Status tab of the Peplink Balance, you may able to find the source of problem.
Page 81: Appendix G. Declaration
Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2022 Peplink...
Page 82 CE Statement for Pepwave Routers ( Balance 30 Pro ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 84 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. Contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 85 Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired opera- tion of the device. https://www.peplink.com Copyright @ 2022 Peplink...
Page 86 Cet equipement est conforme avec l'exposition aux radiations ISED definies pour un environnement non controle. Cet equipement doit etre installe et utilise a une distance minimum de 20 cm entre le radiateur et votre corps. Battery Caution Statement (Balance One) https://www.peplink.com Copyright @ 2022 Peplink...
Page 87 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2022 Peplink...
Page 88 CE Statement for Pepwave Routers ( Balance One ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 90 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. Contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 91 For Balance 30 LTE, Balance 310X, Balance 310X 5G, Balance 310 5G, Balance 310 Fiber This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: https://www.peplink.com Copyright @ 2022 Peplink...
Page 92 All Ethernet cables are designed for intra-building connection to other equipment. Do not connect these ports directly to communication wiring or other wiring that exits the building where the appliance is located. https://www.peplink.com Copyright @ 2022 Peplink...
Page 93 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2022 Peplink...
Page 94 (2) This device must accept any interference, including interference that may cause undesired opera- tion of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio ex- empts de licence. L'exploitation est autorisee aux deux conditions suivantes: https://www.peplink.com Copyright @ 2022 Peplink...
Page 95 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2022 Peplink...
Page 96 CE Statement for Pepwave Routers ( Balance One Core ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 98 CE Statement for Pepwave Routers ( Balance Two ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 100 UK Statement for Pepwave Routers ( Balance Two ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 102 CE Statement for Pepwave Routers ( Balance 2500 EC ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 104 UK Statement for Pepwave Routers ( Balance 2500 EC ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 106 CE Statement for Pepwave Routers ( Balance 20X for EC25-E https://www.peplink.com Copyright @ 2022 Peplink...
Page 108 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 109 UK Statement for Pepwave Routers ( Balance 20X for EC25-E https://www.peplink.com Copyright @ 2022 Peplink...
Page 111 CE Statement for Pepwave Routers ( Balance 20X for LN920A6-WW ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 113 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 114 UK Statement for Pepwave Routers ( Balance 20X for LN920A6-WW ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 116 本設備- LTE 900 (Band 8) FDD⽀援LTE上⾏885MHz -915MHz \ 下⾏930MHz -960MHz。本設備- LTE 700 (Band 28) FDD⽀援LTE上⾏703MHz -748MHz \ 下⾏758MHz -803MHz。分時雙⼯(TDD)：本設備- LTE 2600 (Band 38) TDD⽀援頻段(2570MHz～2620MHz)。本設備- LTE 2600 (Band 41) TDD⽀援頻段(2500MHz～2690MHz)。為避免電磁⼲擾，本產品不應安裝或使⽤於住宅環境。如果更換不正確之電池型式會有爆炸的風險，請依製造商說明書處理⽤過之電池。 https://www.peplink.com Copyright @ 2022 Peplink...
Page 117 CE Statement for Pepwave Routers ( Balance 30 LTE ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 119 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 120 CE Statement for Pepwave Routers ( Balance 210 ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 122 CE Statement for Pepwave Routers ( Balance 310 5G ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 124 WWAN : Refer 3GPP TS 36.521 -1 ( UE Power class ) EM7565 module: EM9191 module: https://www.peplink.com Copyright @ 2022 Peplink...
Page 125 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 21cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 126 UK Statement for Pepwave Routers ( Balance 310 5G ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 128 CE Statement for Pepwave Routers (Balance 310X 5G) https://www.peplink.com Copyright @ 2022 Peplink...
Page 130 This equipment complies with CE radiation exposure limits set forth for an uncontrolled envi- ronment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 131 UK Statement for Pepwave Routers (Balance 310X 5G) https://www.peplink.com Copyright @ 2022 Peplink...
Page 133 CE Statement for Pepwave Routers (Balance 310 Fiber 5G) https://www.peplink.com Copyright @ 2022 Peplink...
Page 135 This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This equipment is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in above countries. contact as: https://www.peplink.com/ https://www.peplink.com Copyright @ 2022 Peplink...
Page 136 UK Statement for Pepwave Routers (Balance 310 Fiber 5G) https://www.peplink.com Copyright @ 2022 Peplink...
Page 138 CE Statement for Pepwave Routers ( Balance SDX ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 140 UK Statement for Pepwave Routers ( Balance SDX ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 142 CE Statement for Pepwave Routers ( EPX ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 144 This caution label show on bottom of device for Balance SDX Pro and EPX models, and near power supply position. https://www.peplink.com Copyright @ 2022 Peplink...
Page 145 CE Statement for Pepwave Routers ( Balance SDX Pro ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 147 UK Statement for Pepwave Routers ( Balance SDX Pro ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 149 Risk of explosion if the battery replaced by an incorrect type, place the battery into fire, a hot oven, extremely high temperature or low air pressure surrounding environment, the leakage of flammable liquid or gas, and mechanically crushing or cutting of the battery. https://www.peplink.com Copyright @ 2022 Peplink...
Page 150 CE Statement for Pepwave Routers ( Balance 380X / Balance 580X ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 152 UK Statement for Pepwave Routers ( Balance 380X / Balance 580X ) https://www.peplink.com Copyright @ 2022 Peplink...
Page 154 380X 580X 1350 2500 2500 EC Output 5V DC, 5V DC, 5V DC, 5V DC, 5V DC, 5V DC, 5V DC, 2A 5V DC, 1A 5V DC, 1A Rating 0.5A 0.5A 2.5A 2.5A 2.5A 2.5A https://www.peplink.com Copyright @ 2022 Peplink...

peplink PEPWAVE Balance One User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for peplink PEPWAVE Balance One

Summary of Contents for peplink PEPWAVE Balance One

This manual is also suitable for:

Table of Contents