25.10 Feature Add-ons
Some Pepwave routers have features that can be activated upon purchase. Once the purchase is
complete, you will receive an activation key. Enter the key in the Activation Key field, click Activate,
and then click Apply Changes.
25.11 Reboot
This page provides a reboot button for restarting the system. For maximum reliability, the Pepwave
router can equip with two copies of firmware. Each copy can be a different version. You can select the
firmware version you would like to reboot the device with. The firmware marked with (Running) is the
current system boot up firmware.
Please note that a firmware upgrade will always replace the inactive firmware partition.
26
Tools
26.1 Ping
TM
The ping test tool sends pings through a specified Ethernet interface or a SpeedFusion
VPN
connection. You can specify the number of pings in the field Number of times, to a maximum number
of 10 times. Packet Size can be set to a maximum of 1472 bytes. The ping utility is located at
System>Tools>Ping, illustrated below:
http://www.peplink.com
178
Copyright @ 2017 Pepwave