Gps Data; Active Sessions - peplink Pepwave MAX Series User Manual

Uptime
This shows the length of time since the device has been rebooted.
System Time
This shows the current system time.
Diagnostic
The Download link is for exporting a diagnostic report file required for system investigation.
Report
Remote
Click Turn on to enable remote assistance.
Assistance
The second table shows the MAC address of each LAN/WAN interface connected. To view your
device's End User License Agreement (EULA), click
If you encounter issues and would like to contact the Pepwave Support Team (http://www.pepwave.com/contact/), please
download the diagnostic report file and attach it along with a description of your issue.
In Firmware 5.1 or before, the diagnostic report file can be obtained at System>Reboot.
27.2

GPS Data

The MAX HD2 and HD2 IP67 automatically store up to seven days of GPS location data in GPS
eXchange format (GPX). To review this data using third-party applications, click Status>Device and
then download your GPX file.
The Pepwave MAX BR1, HD2, and HD2 IP67 export real-time location data in NMEA format through
the LAN IP address at TCP port 60660. It is accessible from the LAN or over a SpeedFusion connection.
To access the data via a virtual serial port, install a virtual serial port driver. Visit
http://www.peplink.com/index.php?view=faq&id=294 to download the driver.

27.3 Active Sessions

Information on active sessions can be found at Status>Active Sessions>Overview.
http://www.peplink.com
.
Important Note
183 Copyright @ 2017 Pepwave