25.8 InControl
InControl is a cloud-based service which allows you to manage all of your Peplink and Pepwave devices
with one unified system. With it, you can generate reports, gather statistics, and configure your devices
automatically. All of this is now possible with InControl.
When this check box is checked, the device's status information will be sent to the Peplink InControl
system. This device's usage data and configuration will be sent to the system if you enable the features in
the system.
Alternately, you could also privately host InControl. Simply check the box beside the "Privately Host
InControl" open, and enter the IP Address of your InControl Host.
You can sign up for an InControl account at https://incontrol2.peplink.com/. You can register your
devices under the account, monitor their status, see their usage reports, and receive offline notifications.
25.9 Configuration
Backing up Pepwave router settings immediately after successful completion of initial setup is strongly
recommended. The functionality to download and upload Pepwave router settings is found at
System>Configuration. Note that available options vary by model.
http://www.peplink.com
176
Copyright @ 2017 Pepwave