Algorithm: Enforced - peplink Pepwave MAX Series User Manual

With the persistence feature, rules can be configured to enable client computers to persistently utilize the
same WAN connections for e-banking and other secure websites. As a result, a client computer will
communicate using one IP address, eliminating the issues mentioned above.
There are two persistent modes: By Source and By Destination.
The same WAN connection will be used for traffic matching the rule and originating from the
By Source:
same machine, regardless of its destination. This option will provide the highest level of
application compatibility.
The same WAN connection will be used for traffic matching the rule, originating from the same
By Destination:
machine, and going to the same destination. This option can better distribute loads to WAN
connections when there are only a few client machines.
The default mode is By Source. When there are multiple client requests, they can be distributed
(persistently) to WAN connections with a weight. If you choose Auto in Load Distribution, the
weights will be automatically adjusted according to each WAN's Downstream Bandwidth which is
specified in the WAN settings page). If you choose Custom, you can customize the weight of each
WAN manually by using the sliders.

15.2.3 Algorithm: Enforced

This setting specifies the WAN connection usage to be applied on the specified IP protocol and port.
This setting is applicable only when Algorithm is set to Enforced.
http://www.peplink.com 110 Copyright @ 2017 Pepwave