Web Blocking; Customized Domains; Exempted User Groups; Exempted Subnets - peplink Pepwave MAX Series User Manual

19.2.2 Web Blocking

Defines web site domain names to be blocked from LAN/PPTP/PepVPN peer clients' access except for
those on the Exempted User Groups or Exempted Subnets defined below.
If "foobar.com" is entered, any web site with a host name ending in foobar.com will be blocked, e.g.
www.foobar.com, foobar.com, etc. However, "myfoobar.com" will not be blocked.
You may enter the wild card ".*" at the end of a domain name to block any web site with a host name
having the domain name in the middle. If you enter "foobar.*", then "www.foobar.com",
"www.foobar.co.jp", or "foobar.co.uk" will be blocked. Placing the wild card in any other position is not
supported.
The device will inspect and look for blocked domain names on all HTTP traffic. Secure web (HTTPS)
traffic is not supported.

19.2.3 Customized Domains

Enter an appropriate website address, and the Peplink Balance will block and disallow
LAN/PPTP/SpeedFusionTM peer clients to access these websites. Exceptions can be added using the
instructions in Sections 20.1.3.2 and 20.1.3.3.
You may enter the wild card ".*" at the end of a domain name to block any web site with a host name
having the domain name in the middle. For example, If you enter "foobar.*," then "www.foobar.com,"
"www.foobar.co.jp," or "foobar.co.uk" will be blocked. Placing the wild card in any other position is not
supported.
The Peplink Balance will inspect and look for blocked domain names on all HTTP traffic. Secure web
(HTTPS) traffic is not supported.

19.2.4 Exempted User Groups

Check and select pre-defined user group(s) who can be exempted from the access blocking rules. User
groups can be defined at QoS>User Groups section. Please refer to Section 17.1 for details.

19.2.5 Exempted Subnets

With the subnet defined in the field, clients on the particular subnet(s) can be exempted from the access
blocking rules.

19.2.6 URL Logging

Click enable, and the enter the ip address and port (if applicable) where your remote syslog server is
located.
http://www.peplink.com 128 Copyright @ 2017 Pepwave