Configuring The Wan Interface(S) - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

Configuring the WAN Interface(s)

11
WAN interface settings are located at: Network> Interfaces > WAN
By clicking a connection name,connection settings of that WAN can be modified.The connection method
and details can be obtained from yourISP.
WAN Connection
This field is for defining a name to represent this WAN connection.
Name
Enable
This field is for choosing whether to enable this WAN connection.
This option allows you to select the connection method for this WAN connection. Available
options are:
Connection Method
See sections 11.1.1, 11.1.2, 11.1.3
connection method.
This field shows that NAT (Network Address Translation) will be applied to the traffic
routing over this WAN connection. IP Forwarding is also available when you click the link
Routing Mode
in the help text. For further details, please refer to Appendix B, Routing under DHCP,
Static IP, and PPPoE.
http://www.peplink.com
Connection Settings
1. DHCP
2. Static IP
3. PPPoE
4. Mobile Internet Connection
-73 / 227 -
,
and11.1.4 for configuration details pertaining to each
Copyright © 2014 Peplink