Assembling The Wok Base; Storage - Gastroback Design Wok Advanced Pro Operating Instructions Manual

Note:
Before inserting the temperature control probe into the probe socket, make sure
that the interior of the probe socket is fully dry. To do this, shake out excess water,
then wipe the interior of the probe socket with a dry cloth.

ASSEMBLING THE WOK BASE

3. Lower the wok bowl over the base as illustrated in picture D. Press down on the
quick release knob and rotate clockwise to lock into place, as shown in picture E.
Ensure the base is locked into position before rotating the wok right-side-up.

STORAGE

WARNING : Young children must be supervised that they do not play with the
appliance or any part of it. When the appliance is not in use, always switch off: turn
the temperature control probe to setting 0. Thereafter, unplug the appliance from the
power outlet, than unplug the temperature control probe from the wok base. Do not
leave the appliance unattended while connected to the power outlet to avoid risk of
electric shock or fire.
Always clean the appliance and all its parts before storing to avoid accumulation of
dried-on food (see: ›Care and cleaning‹).
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight
and inadmissible strain (mechanical or electric shock, heat, moisture) and where it is
out of reach of young children. Place the appliance on a clean and stable surface,
where it cannot fall.
Do not place any hard or heavy objects on the appliance or any part of it. Never
place the appliance in an upright position. Do not place the grilling tops on one
another to avoid damage to the non-stick coatings.
Always handle the power cord and temperature control probe with special care.
Electric cables may never be knotted, twisted, pulled, strained or squeezed.
Do not use any parts or accessories of the appliance for any other purpose than
operating the appliance. It is good advice to store the parts and accessories of the
appliance with the appliance.
CAUTION: Do not hold the appliance by the power cord for moving the appliance.
To move the appliance, always grasp the housing at both sides to avoid damage.
Store the temperature control probe carefully. Do not knock or drop it because the
probe may be damaged.
61