Table of Contents
Advertisement
S
PECIFICATIONS
Networking and connectivity
• Supports AppleTalk and TCP/IP protocols simultaneously.
• Supports EtherTalk Phase 2 (allows users to print from a Mac OS computer to the
ColorPASS using the AppleTalk network protocol over an Ethernet network).
• RJ-45 connector (upper port) that supports 10BaseT/100BaseTX/1000BaseT twisted pair
network connectivity.
• RJ-45 connector (lower port) that provides the Command/Status interface between the
ColorPASS and the copier.
N
:
The network cable at the customer site and the Command/Status Ethernet Crossover
OTE
cable included with the ColorPASS are not interchangeable. Make sure to attach the correct
cable to the appropriate RJ-45 port on the ColorPASS back panel (see
User software
A complete description of user software is provided in Welcome from the user documentation
set. For optimal performance, maintain current versions of the user software on every network
computer used to print to the ColorPASS. User software may be installed directly on client
computers equipped with a DVD drive, or over a network via the Fiery User Software
Installer that resides on the ColorPASS.
Safety and emissions compliance
The ColorPASS has been certified to meet or surpass the following government standards:
Safety approvals
• UL 60950-1 (TUV/CU mark)
• CSA 22.2 #60950-1
• EN 60950-1 (TUV/GS mark)
• CB scheme IEC 60950-1
EMI/EMC approvals
• FCC Class B
• VCCI Class B
• EN55022 Class B
• EN55024
• AS/NZS CISPR22: 2004 Class B
133
page
28).
Advertisement
Table of Contents
