Table of Contents
Advertisement
T
3:
ColorPASS error messages and condition (Continued)
ABLE
Symptom
Control Panel screen and
Activity light appear as
follows:
Activity light status:
Off, then solid red.
Control Panel screen and
Activity light appear as
follows:
S T A R T I N G U P. . .
Activity light status:
Blinking orange,
then solid red.
T
ROUBLESHOOTING
Possible cause
Possibly one of the following:
• Wrong, missing, incorrectly connected,
or faulty DIMM(s)
• Faulty motherboard
Possibly one of the following:
• Faulty disk in the DVD drive
• Faulty motherboard
Suggested action
Startup (continued)
1. Recheck all cables and connections.
2. Reboot the ColorPASS.
3. If the problem persists, verify that the DIMMs are installed
as described in the DIMM section on
be installed in matching pairs in alternating sockets. Check
for incorrect type, wrong capacity, missing, or faulty
DIMM(s). Reseat the DIMM(s) to remove any oxidation on
the connector (see
4. If the problem persists, you may need to replace the
motherboard (see
1. Reboot the ColorPASS.
2. If the problem occurs when you are installing software from
bootable media (DVD or CD), the media may be damaged.
Try another DVD or CD.
3. If the problem persists, replace the motherboard (see
page
60).
page
76. DIMMs must
page
76).
page
60).
124
Advertisement
Table of Contents
