Table of Contents
Advertisement
S
P
ERVICE
T
O REMOVE AND REPLACE THE TOP PANEL
To remove the top panel, you must first remove the left, right, and front panels.
N
:
OTE
1 Remove the plug from the top panel.
From the cutout in left side of the top panel, access and loosen the locking bolt, and then
remove the plug.
2 Loosen the top panel.
Slide the top panel a few inches toward the front of the chassis to disengage the hooks in the
panel from the slots in the top of the chassis.
You may need to tap the back edge of the panel toward the front of the chassis to
N
:
OTE
disengage the panel.
3 Detach the UIB cable from the motherboard.
4 Remove the panel from the chassis.
Carefully route the UIB cable out of the hole in the top of the chassis as you remove the top
panel.
Plug
Cutout
F
16:
IGURE
ROCEDURES
Removing/replacing the top panel
UIB cable
Slot (1 of 4)
54
Advertisement
Table of Contents
