Table of Contents
Advertisement
T
3:
ColorPASS error messages and condition (Continued)
ABLE
Symptom
Control Panel screen and
Activity light appear as
follows:
S T A R T I N G U P. . .
Activity light status:
Blinking green,
then solid red.
Activity light status
progresses from solid green
to solid red.
Activity light status:
Solid green, then
solid red.
T
ROUBLESHOOTING
Possible cause
Problem with the Windows
operating system.
Possibly one of the following:
• Problem with system software
• Print job is corrupt or too large
• Faulty UIB cable
• CPU overheated
• Faulty motherboard
Suggested action
Startup (continued)
1. Recheck all cables and connections.
2. Reboot the ColorPASS.
3. If the problem persists, reinstall system software
(see
page
1. If you suspect that the problem may be caused by a print
job, try printing a different job.
2. Recheck all cables and connections.
3. Reboot the ColorPASS and check whether the CPU cooling
assembly fan is operating. If the fan is properly connected
to the motherboard but does not operate, replace the
cooling assembly.
4. If the problem persists, reinstall system software
(see
page
5. If the problem persists, try connecting another UIB cable
(see
Figure 13 on page
6. If the problem persists, replace the motherboard (see
page
60).
104).
104).
48).
125
Advertisement
Table of Contents
