Table of Contents
Advertisement
S
YSTEM AND USER SOFTWARE
Restoring the system configuration
You can restore the configuration of the ColorPASS to its previous state using a configuration
file. For more information about a configuration file, see
before system software installation" on page
If you could not save a configuration file, you must configure Setup. After you exit Setup and
the ColorPASS reboots, ask the network administrator to restore any archived settings and
files. For more information, see Configuration and Setup, which is part of the user
documentation set.
T
O RESTORE THE SYSTEM CONFIGURATION AFTER SYSTEM SOFTWARE INSTALLATION
1 On the screen, right-click FieryBar. In the shortcut menu, click WebTools or Command
WorkStation.
2 Right-click FieryBar. In the shortcut menu, click WebTools or Command WorkStation.
3 In WebTools or Command WorkStation, click the Configure tab.
4 Click the Launch Configure button.
5 Enter the Administrator password for the ColorPASS. Click OK.
6 The default Administrator password is
the password.
7 On the left side, choose Server > Backup/Restore.
8 Click the Restore button.
9 Browse to the configuration file. Click Next.
For more information, see
installation" on page
10 In the Restore dialog box, select settings to restore. Click Next.
11 Click Finish.
Installing system software
System software is provided on the following media:
• DVD1: System software (Fiery)
• DVD2: Windows 7 Pro FES x64
• DVD3: Windows 7 Pro FES x64
• DVD4: User software (Drivers and Utilities)
106.
Fiery.1
. However, the network administrator can change
"To save the system configuration before system software
106.
"To save the system configuration
107
Advertisement
Table of Contents
