Table of Contents
Advertisement
U
C
SING THE
OLOR
T
,
,
O SHUT DOWN
RESTART
OR REBOOT THE
1 Navigate to the Info screen on the copier touch panel (see
2 Make sure that the Info screen reads Idle.
If Printing or Processing appears on the touch panel, the ColorPASS is processing. You must
wait until the system finishes and reaches the Idle state.
If the system has just finished processing, wait at least five seconds after the system reaches
Idle before beginning the shutdown procedure.
Notify the network administrator before you remove the ColorPASS from
N
:
OTE
the network.
3 Press the Functions button to display the Functions menu.
4 Press the Shut Down button.
5 Select Restart Server, Shut Down System, or Reboot System.
Before accessing internal components, make sure that all cables are disconnected from the
back of the ColorPASS.
PASS
C
PASS
OLOR
FROM THE COPIER TOUCH PANEL
Use the line selection buttons to select Restart Server,
Shut Down System, or Reboot System.
page
35).
42
Advertisement
Table of Contents
