Table of Contents
Advertisement
P
13
REFACE
ColorPASS components
The terms "replace" and "replacing" are used throughout this guide to mean the reinstallation
of existing components. Install new components only when necessary.
The term "Control Panel" refers to the area on the front of the ColorPASS, including the
green/red activity light, the display window (LCD—liquid crystal display), and the buttons to
the left and right of the display window.
The term "LCD" refers to the display window of the ColorPASS Control Panel.
The term "monitor" refers to the ColorPASS optional flat panel monitor.
The term "DVD drive" (Digital Versatile Disk drive) refers to the ColorPASS DVD drive.
The term "system software" refers to the following software installed on the ColorPASS hard
disk drive (HDD):
• DVD 1: Fiery system software
• DVD 2 and DVD 3: Microsoft Windows 7 Professional for Embedded Systems x64
operating system software (Backup/Recovery and Upgrade)
• DVD 4: User Software
For other terms used to identify components of the ColorPASS, see the reference key in
Figure 12 on page
46.
Connectors and components labeled "not used"
Connectors and components labeled "not used" are disabled or are not used in the standard
ColorPASS configuration.
Document conventions
References to ColorPASS user documentation, such as Configuration and Setup, are displayed
in italics. The user documentation files are installed from the user documentation set.
N
:
The note format highlights important messages and additional information.
OTE
The warning icon indicates a potentially hazardous situation which, if instructions are not
followed, could result in death or serious injury.
The caution icon indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to equipment.
Advertisement
Table of Contents
