Table of Contents
Advertisement
U
C
PASS
SING THE
OLOR
enables you to print system pages from the ColorPASS (see
Print Pages
print the following pages from the submenu that appears:
•
enables you to confirm that the ColorPASS-to-copier connection is functioning
Test Page
properly. The Test Page provides sample images that you can use to troubleshoot the
ColorPASS. The following information is also listed: Server name, printer model, output
profile, calibration information, RGB source, rendering style, date and time printed,
CMYK simulation, simulation method, and compression information.
When you print a Test Page to confirm that the ColorPASS-to-copier connection is
functioning properly, keep in mind that:
All color patches should be visible, even though they may be very faint in the 5% and 2%
range.
Each color's patch set should show uniform gradation from patch to patch as the color
lightens from 100% to 0%.
Poor image quality may indicate a need to calibrate the system or service the copier.
Information on the Test Page includes the date and time of the last calibration so that the
Test Page can be kept for future reference. For more information, see Color Printing, which
is part of the user documentation set.
•
prints the current server and device configuration. This includes
Configuration
information about all current Setup settings, calibration profiles, and the Ethernet address
of the ColorPASS. The Configuration page also provides version information for the
BIOS chip and information about any installed options or special features included in the
ColorPASS.
Printing the Configuration page can also be helpful during installation, Setup, and service.
After installing the ColorPASS (including connecting to the network) and before default
settings are changed in Run Setup, you can obtain a record of the defaults by printing the
Configuration page. Before you perform any service procedure, print the ColorPASS
Configuration page, if possible, so that you can return the settings to their former
configuration, if necessary.
•
prints a log of the most recent jobs printed on the ColorPASS. By default, the Job
Job Log
Log lists the last 55 jobs. For more information about the Job Log, see Configuration and
Setup, which is part of the user documentation set.
•
prints the color reference charts. These pages include swatches of the RGB,
Color Charts
CMY, and PANTONE colors available from the ColorPASS.
• Font List : A list of all fonts resident on the ColorPASS hard disk drive.
•
prints a log of the last 55 e-mail transmissions to or from the ColorPASS. The
E-mail Log
E-mail printing feature must be enabled in Setup before the E-mail Log can be printed.
For more information, see Configuration and Setup, which is part of the user
documentation set.
•
lists jobs scanned on the copier and sent to the FTP site designated in the Setup
FTP Log
options. The log is available only when Scan to FTP is enabled in Setup. For more
information, see Configuration and Setup, which is part of the user documentation set.
37
page
39). You can
Advertisement
Table of Contents
