Floor Structure Requirements; Network Interface Connectivity - Canon imageRUNNER ADVANCE C7500 II Series Customer Expectation Document

3.5 Floor Structure Requirements

The floor on which this machine is installed must have strength of at least
2
61.5 lb/ft (300 kg/m
building contractor before installing the machine.
The weight of the machine is distributed on the floor through the adjusters and
wheels. Do not install the machine on an unstable floor or platform.

3.6 Network Interface Connectivity

A standard Ethernet 10Base-T/100Base-TX/1000 Base-T interface jack (RJ-45) for
device installation, monitoring, Mail Box and Advanced Box access via the Remote
UI, ships standard with all configurations. A Wireless LAN connection also ships
standard with all configurations.
Standard support for up to two USB 2.0 High-Speed interface ports and one USB
3.0 port on the back of the machine comes with all configurations. One USB port is
to the left of the console and can be used for scanning, printing, or direct printing
from a USB memory stick. The USB 3.0 port can only be used to attach a USB
keyboard, third-party card reader, direct printing, or for servicing the machine.
Version 8 imageRUNNER ADVANCE C7500 and C7500 II Series Customer Expectations Document
imageRUNNER ADVANCE C7500 and C7500 II Series Customer Expectations Document
2
). If the floor does not have this level of strength, consult a
Page 34