Power button
Reset button
Use the
N
:
OTE
reset button only
if the system is
unresponsive to
keyboard or
mouse actions.
T
ROUBLESHOOTING
Checking external connections
Before removing the side and front panels of the ColorPASS to check internal components,
eliminate the most obvious sources of problems. Make sure that:
• All interface cables to the system are plugged into the proper connectors
(see
Figure
40).
• The power cable is plugged into the power outlet.
• The LED on the network port is blinking to indicate network activity.
Control panel
DVD drive
USB ports
Eject button
Front panel
F
40:
ColorPASS external cable connections
IGURE
Power connector
Power switch
USB ports (x4)
Network port
USB ports (x2)
Command/Status port
DVI port
Copier interface port
113
Back panel